Read Sony KV-HP29M83 Service Manual online
– 9 –
KV-HP29M83/M93/N63
RM-GA002
CN007
CN905
CN9201
a) Dressing of Conn Assy, 5P YUV
Dress Conn Assy, 5P YUV around shield case.
Use pin, wires A019 and A017 to dress Conn Assy, 5P YUV.
Use pin, wires A019 and A017 to dress Conn Assy, 5P YUV.
R5032
T504
CN003
R579
Deflection area
CN9201
b) Dressing of Conn Assy, 4P VM and Connector Assy, 5P
Video2
Dress Conn Assy, 4P VM behind Conn Assy, 5P Video2 as shown.
Conn Assy, 5P Video2 is used to prevent Conn Assy, 4P VM from bending
towards T504, R579 and R5032 (high temperature parts).
Conn Assy, 5P Video2 is used to prevent Conn Assy, 4P VM from bending
towards T504, R579 and R5032 (high temperature parts).
CAUTION:
Keep Conn Assy, 5P Video2 away from deflection area (T504, R5032, etc.)
when dressing.
Keep Conn Assy, 5P Video2 away from deflection area (T504, R5032, etc.)
when dressing.
Conn Assy, 5P YUV
Pin, wire A017
Keep wires away
from R121
Dress Conn Assy, 5P YUV
around shield case
Make sure the UL tape is positioned at
the sharp edge of shield case to prevent
wire from being scratched
Pin, wire A019
Conn Assy, 4P VM
Dress Conn Assy, 4P VM behind
Conn Assy, 5P Video2
Lead Assy, Earth is
above Conn Assy, 5P
Conn Assy, 5P
Video2
Right side
Left side
1) Earth Assy, Coating is installed as shown below.
2) Insert the 2 Earth Assy, Coating wires to CN705 & CN707 as shown.
3) Insert Conn Assy, 7P RGB into CN701.
3) Insert Conn Assy, 7P RGB into CN701.
CV board
CN701
Heatsink A751
Conn Assy, 7P RGB
BLK+BLK
to CN707
to CN707
BLK+BLK
to CN705
to CN705
Earth Assy, Coating dressing
CV board
CN707
CN705
Earth Assy,
Coating wires
CN707
CN705
2-6. Dressing of Conn Assy
2-7. Installation and dressing of Earth Assy, Coating
Click on the first or last page to see other KV-HP29M83 service manuals if exist.