KV-HP29M83 - Sony TV Service Manual (repair manual). Page 14

– 13 –

Dress Cap Assy, High Voltage with Holder, HV cable combi
as shown.

Caution:
1) Make sure the specified position is being followed.
2) Position the Cap Assy, High Voltage in the inner ring of the
 

Holder, HV cable combi (see diagram)

DGC

HV cap

TVSR requirement:
1.  Spacing between HV cable and other conductive
 

partís surface is 1mm/kV or more.

2.  Spacing between HV cable's and enclosure with
 

ventilation or the edge where terminal bracket

 

and rear cover meet: 10 mm or more.

CAUTION:
Production side please ensure that the portion of HV cable above the Holder,
HV Cable Combi is kept away from CRT's carbon area.
Also, portion of HV cable below the Holder, HV Cable Combi needs to be kept
away from conductive parts (DGC, rotation coil, CRT's carbon area, speaker
wire, etc).
Ensure forming of HV cable is OK and no unnatural curve occurs.
Do not twist or loop the cable.

CRT's carbon

area

Dress Holder, HV Cable Combi to Cap

Assy, High Voltage

230 ± 5 mm

Holder, HV cable combi

DGC

Inner Ring

Min. distance = 1mm/kV

Min. distance = 1mm/kV

Min. distance =

1mm/kV

Keep distance of HV cable

from other wires, conductive

parts and

CRT's carbon area

CRT's carbon

area

Install AC cord holder to AC power cord at specified position as shown.

650 ± 5mm 

Hook AC Power Cord into CRT

support's hook

Dress behind

boss

Make sure AC cord is

straight between boss and

holder

Beznet

Attach Purse Lock (S)

Ø 8 in to rear cover

 

Keep AC cord away

from heatsinks

Attach AC cord onto holder and

insert to bottom cover

Make sure AC cord is behind

beznet and above mounted

boards when docking chassis

--> avoid it from being trapped

between chassis and beznet