Read Sony KV-HP29M83 Service Manual online
– 12 –
KV-HP29M83/M93/N63
RM-GA002
Dress Lead Assy, Speaker to center position of Rotation coil using purse lock Ø 9 as shown.
Make sure Earth Assy, Coating wire is above Lead Assy, Speaker. This is to keep Lead Assy, Speaker away from Deflection Yoke.
Make sure Earth Assy, Coating wire is above Lead Assy, Speaker. This is to keep Lead Assy, Speaker away from Deflection Yoke.
Lead Assy, Speaker
(RED+BLK)
(RED+BLK)
Rotation Coil
Purse lock
Ø 9
Rotation coil
Lead Assy,
Speaker
Pull wire to right
DGC
Lead Assy,
Speaker
Purse lock
DGC
Lead Assy,
Speaker
DGC Conn
Purse lock
Dress Lead Assy, Speaker
and DGC together using
purse lock Ø 9
Purse lock Ø 9
DGC Conn
DGC
Dress Lead Assy, Speaker, DGC
Conn and DGC together using
purse lock Ø 9
Lead Assy, Speaker
(RED+BLK)
Pull wire to left
Earth Assy, Coating wire is
above
Lead Assy, Speaker
Earth Assy, Coating
wire
Dress Lead Assy, Speaker to
center position of Rotation Coil
using purse lock Ø 9
Purse lock Ø 9
Lead Assy, Speaker
(WHT+BLK)
DGC
Rotation Coil
DY
Attach purse lock Ø 5
here
Lead Assy,
Speaker
Install Cap Assy, High Voltage as shown.
TVSR Requirement:
1. Keep HV cable away from conductive parts (distance of 1mm/kV).
2. Keep spacing between edge of anode cap & conductive parts (distance of 0.5mm/kV).
3. Keep spacing between edge of anode cap & non-conductive parts (distance of at least 5mm or more).
1. Keep HV cable away from conductive parts (distance of 1mm/kV).
2. Keep spacing between edge of anode cap & conductive parts (distance of 0.5mm/kV).
3. Keep spacing between edge of anode cap & non-conductive parts (distance of at least 5mm or more).
Keep distance of
0.5mm/kV
Keep distance of
1mm/kV
90°
DGC Band
Rotation coil
>5mm
>5mm
DGC
HV Cap
2-15. Dress Lead Assy, Speaker to Rotation Coil using purse lock Ø 9
2-16. Cap Assy, High Voltage installation
Click on the first or last page to see other KV-HP29M83 service manuals if exist.