Read Sony KV-32FQ85B Service Manual online
- 11 -
Technical Specifications
TV system:
Depending on your country
selection:
B/G/H, D/K, L, I
Depending on your country
selection:
B/G/H, D/K, L, I
Colour system:
PAL
SECAM, NTSC 3.58, 4.43 (only
Video In)
PAL
SECAM, NTSC 3.58, 4.43 (only
Video In)
Channel Coverage:
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12,
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12,
R21-R69
Picture Tube:
Flat Display FD Trinitron WIDE:
32” (approx. 82 cm. measured
diagonally)
Flat Display FD Trinitron WIDE:
32” (approx. 82 cm. measured
diagonally)
Rear Terminals
•
•
AV1
1/
1
21-pin scart connector
(CENELEC standard)
(CENELEC standard)
including audio/video input,
RGB input, TV audio/video
output.
output.
•
AV2
2/
2
21-pin Scart connector
(CENELEC standard)
including audio / video input,
RGB input, monitor audio/video
output.
output.
•
AV3
3/
3
21-pin Scart connector
(CENELEC standard)
including audio / video input,
S video input,
selectable audio / video output
and SmartLink interface.
(CENELEC standard)
including audio / video input,
S video input,
selectable audio / video output
and SmartLink interface.
•
audio outputs (Left/Right)
- phono jacks
- phono jacks
Front Terminals
•
•
4
S Video input – 4 pin
DIN
DIN
•
4 video
input
– phono jack
•
4 audio input – phono
jacks
•
headphones jack
•
"Memory Stick" Slot
Sound Output:
2 x 20 W (music power)
2 x 10 W (RMS)
2 x 10 W (RMS)
Woofer:
30 W (music power)
15 W (RMS)
30 W (music power)
15 W (RMS)
Power Consumption:
135 W
135 W
Standby Power Consumption:
0.5 W
0.5 W
Dimensions (w x h x d) :
approx. 910 x 586 x 586 mm.
approx. 910 x 586 x 586 mm.
Weight:
approx. 64 Kg.
Accessories supplied:
• 1 Remote Control (RM-942)
• 2 Batteries (IEC designated,
approx. 64 Kg.
Accessories supplied:
• 1 Remote Control (RM-942)
• 2 Batteries (IEC designated,
AA size)
Other features:
• 100 Hz picture, Digital Plus.
• Teletext, Fastext, TOPtext.
• NexTView.
• SmartLink.
• TV system autodetection.
• Dolby Virtual.
• BBE Digital.
• NICAM.
• PAP.
• ACI (Auto Channel
Installation).
• "Memory Stick" (reader).
• Auto Format.
• 100 Hz picture, Digital Plus.
• Teletext, Fastext, TOPtext.
• NexTView.
• SmartLink.
• TV system autodetection.
• Dolby Virtual.
• BBE Digital.
• NICAM.
• PAP.
• ACI (Auto Channel
Installation).
• "Memory Stick" (reader).
• Auto Format.
Optional accessories:
• Stand especially designed for this
• Stand especially designed for this
TV (SU-32FQ3).
S
S
Design and specifications are subject to change without notice.
This instruction manual has been printed on:
Ecological Paper - Totally Chlorine Free
Remote Control Configuration for VCR or DVD
In it’s default condition this remote control will operate the basic functions of this Sony TV, Sony DVDs and
most Sony VCRs. To control VCRs and DVDs of other manufacturers (and some Sony VCR models), the
remote control needs to be configured.
most Sony VCRs. To control VCRs and DVDs of other manufacturers (and some Sony VCR models), the
remote control needs to be configured.
To do this:
• Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below.
On those brands that have more than one code, enter the first code number.
• Sony will endeavour to update the software according to market changes. Therefore, please
refer to code table included with the remote control for latest code set.
• A small label is added inside the battery door to allow you to record your brand codes.
1
Press and hold the
T
button of the remote control for approximately 6
seconds until the green DVD and VCR light of the Media Selector starts
flashing (see fig. 1).
flashing (see fig. 1).
2
While the VCR and DVD lights are flashing, enter all three digits of the
code for your brand of VCR or DVD (see the list below) using the
number
buttons on the remote control (see fig. 2).
If your selected code is entered correctly, the green light VCR or
DVD (according to your selection) will be lit momentarily (see fig.
3), otherwise repeat all the above steps.
3), otherwise repeat all the above steps.
3
Turn on your VCR or DVD and check that the main functions work.
• If your device is not working or some of the functions do not work please check that you
entered the correct code set or try the next code listed against the brand.
• Not all brands are covered and not all models of every brand may be covered.
4
Always remember to press the
T
or
t
button until the green light iluminates according to
the equipment you want to operate with this remote control:
VCR, TV or DVD. Refer to pages
28 - 29 on how to operate the AUX mode.
VCR Brand List
DVD Brand List
Brand Code
Brand
Code
SONY (VHS)
301, 302, 303, 308, 309,362
SONY (BETA)
303, 307, 310
SONY (DV)
304, 305, 306
AIWA
325, 331, 351
AKAI
326, 329, 330
DAEWOO
342, 343
GRUNDIG
358, 355, 360, 361, 320, 351, 366
HITACHI
327, 333, 334
JVC
314, 315, 322, 344, 352, 353, 354, 348, 349
LG
332, 338
LOEWE
358, 355, 360, 361, 320, 351
MATSUI
356, 357
ORION
328
PANASONIC
321, 323
PHILIPS
311, 312, 313, 316, 317, 318, 358, 359,
363, 364
363, 364
SAMSUNG
339, 340, 341, 345
SANYO
335, 336
SHARP
324
THOMSON
319, 350, 365
TOSHIBA
337
fig. 1
6 sec.
V
C
R
TV
DVD
AU
X
MODE
V
C
R
TV
DVD
AU
X
MODE
fig. 3
fig. 2
SONY
001, 029, 030, 036, 037, 038, 039, 040,
041, 042, 043, 044, 053, 054, 055
041, 042, 043, 044, 053, 054, 055
AIWA
021
AKAI
032
DENON
018, 027, 020, 002
GRUNDIG
009, 028, 023, 024, 016, 003
HITACHI
025, 026, 015, 004, 035
JVC
006, 017
KENWOOD
008
LG
015, 014, 034
LOEWE
009, 028, 023, 024, 016, 003
MATSUI
013, 016
ONKYO
022, 033
PANASONIC
018, 027, 020, 002, 045, 046, 047
PHILIPS
009, 028, 023, 024, 016, 003, 031
PIONEER
004, 050, 051, 052
SAMSUNG
011, 014
SANYO
007
SHARP
019, 027
THOMSON
012
TOSHIBA
003, 048, 049
YAMAHA
018, 027, 020, 002
Click on the first or last page to see other KV-32FQ85B service manuals if exist.