Read Sony KP-44DX2U Service Manual online
– 12 –
KP-44DX2
RM-948
32
Connecting Optional Equipment
•
Using the following instructions, you can connect a wide range of optional equipment to your projection TV.
•
Conecting cables are not supplied.
Acceptable input signal
A
No inputs
B
Audio/video and RGB signal
C
Audio/video and S video signal
D
S Video signal
E
Video signal
F
Audio signal
G
No input
Available output signal
Audio signal.
Video/audio from TV tuner.
Video/audio from selected source.
No output.
No output.
No output.
Audio signal to headphones.
A
C
Hi-fi
DVD
VCR
CAM slot
(unscrew and remove
the cover. After
inserting
the
CAM
and
the veiewing card,
screw the cover again)
MODEM
connection
(connect to the
Modem)
B
If
you
want
to
record
signals from any
external equipment:
connect the recording
device to the
C
scart.
DVD
Decoder
8mm/Hi8/ DVC camcorder
S VHS/Hi8
/
DVC camcorder
E
D
F
G
To avoid
picture
distortion:
Do not
connect
equipment
to
D
and
E
connectors
at the same
time.
continued...
Additional Information
33
GB
Additional Information when connecting equipment
Connecting a VCR
We recommend you connect your VCR to the
C
socket using a scart lead. If you do not have a scart lead, use the “Manual
Programme Preset” section on page 20 to tune in the channel of the VCR test signal to TV programme number “0”. Also refer to
your VCR instruction manual to get the VCR test signal.
Connecting a SmartLink VCR
•
SmartLink is a direct link between your projection TV set and a VCR.
•
For SmartLink you need a VCR which supports SmartLink, NexTView, Easy Link* or Megalogic**
* Easy Link is a trademark of Philips Corporation.
** Megalogic is a trademark of Grundig Corporation.
•
For more information on SmartLink, please refer to the Instruction Manual of your VCR.
•
Ensure
that
your
SmartLink
VCR
is
connected
to
the
C
socket,
using
a
fully-wired
21-
pins Scart lead.
To
enjoy
“Dolby
Virtual”
sound
effect
through
your
Hi-Fi
equipment:
Place
the
speakers
of
your
equipment
in
front
of
your
listening
position
and
beside
the
projection
TV set but keeping a distance of 50 cm between each speaker and the projection TV set.
Then by using the menu system, select the menu “Sound Adjustment”and select “Dolby V” on
the “Effect” option (see page 16).
Connecting to external Audio Equipment:
Plug in your Hi-Fi equipment to the audio output sockets
A
if you wish to amplify the audio
output from projection TV and, using the menu system, select the “Sound Adjustment” menu
and set the “TV Speakers” to “Off” (see page 16).
Audio
level
of
the
external
speakers
can
be
modified
by
pressing
the
volume
buttons
on
the
remote control. Also treble and bass settings can be modified through the “Sound
Adjustment” menu.
Using Optional Equipment
In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the
connector to which you have connected the device.
e. g. : Your VCR is connected to the connector with the symbol
:
1/
1. Press the button
on the remote control
repeatedly until you see the symbol
1 on the screen.
1
Connect
your
equipment
to
the
designated
projection
TV
socket,
as
it
is
indicated
on
the
previous
page.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the
button repeatedly until the correct
input symbol appears on the screen.
Symbol
Input Signals
1
•
Audio / video input signal through the Scart connector
B
1
•
RGB input signal through the Scart connector
B
. This symbol appears only if an RGB
source has been connected.
2
•
Audio/video input signal through the Scart connector
C
.
2
•
S
Video
Input
signal
through
the
Scart
connector
C
. This
symbol
appears
only
if
a
S
Video
source has been connected.
3
•
Video input signal through the phono socket
E
and Audio input signal through
F
.
3
•
S Video Input signal through the front S Video input jack
D
and Audio signal through
F
. This symbol appears only if an S Video source has been connected.
4
Press
DIGITAL/
button on the remote control to return to the normal TV picture.
For mono equipment
Connect the phono plug to the L/G/S/I socket on the side of the TV and select
3 or
3 input signal
using the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select
“Dual Sound” “A” on the sound menu screen (see page 16).
S
S
S
~50°
Hi-Fi speakers
Your sitting position
Additional Information
Click on the first or last page to see other KP-44DX2U service manuals if exist.