Read Sony KP-44DX2U Service Manual online
– 14 –
KP-44DX2
RM-948
36
Technical Specifications
TV system:
I/DVB-T
Colour system:
PAL
SECAM, NTSC 3.58, 4.43 (only Video In)
MPEG 2 MP@NL
Channel Coverage:
I:
UHF B21-B69
Projected picture size:
44” (approx. 112 cm. measured diagonally)
Rear Terminals
•
1/
1
21-pin scart connector (CENELEC
standard) including audio/video input,
RGB input, TV audio/video output.
•
2/
2
21-pin Scart connector (CENELEC
(SMARTLINK)
standard) including audio/video input, S
video input, selectable audio/video output
and SmartLink interface.
•
audio outputs (Left/Right) - phono jacks.
•
RF In (Analogue)
•
RF In (Digital)
•
RF Out
•
CAM (Conditional Access Module) slot.
•
MODEM connection.
Side Terminals:
•
3
S Video input – 4 pin DIN
•
3
video input – phono jack
•
3
audio input – phono jacks
•
headphones jack
Sound Output:
2 x 30 W (music power)
2 x 15 W (RMS)
Power Consumption:
220 W
Standby Power Consumption:
1 W
Dimensions (w x h x d) :
approx. 1100 x 1160 x 536 mm.
Weight:
approx. 68 Kg.
Accessories supplied:
• 1 Remote Control (RM-948)
• 2 Batteries (IEC designated, AA size)
• 1 RF Loopthrough cable
Other features:
• Digital terrestrial reception.
• Digital Comb Filter (High resolution).
• 100 Hz picture, Digital Plus.
• Digital Teletext.
• Analogue Teletext, Fastext, TOPtext.
• NICAM.
• Sleep Timer.
• SmartLink.
• Dolby Virtual.
• BBE.
• PIP.
• Auto Format.
• CAM connection (for future use only).
• MODEM connection (for service use only).
S
>
>
S
Design and specifications are subject to change without notice.
This instruction manual has been printed on:
Ecological Paper - Totally Chlorine Free
Additional Information
37
GB
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
•
If
you
continue
to
experience
problems,
have
your
projection
TV
serviced
by
qualified
personnel
or
you
can
contact
the
Sony UK Digital Helpline on 0870 600 1717.
•
Never open the casing yourself.
Problem
No picture (screen is dark) and no sound.
Poor or no picture (screen is dark), but
good sound.
No Digital channels after tuning.
No picture or no menu information from
equipment connected to the Scart
connector.
Good picture, no sound.
No colour on colour programmes.
When you switch on the TV the last
channel you were watching before
switching the TV off does not appear.
Undefined
picture
with
different
colour
on
the outlines of the images.
Noisy
picture
when
viewing
a
TV
channel.
Distorted picture when changing
programmes or selecting teletext.
Brightness level of the picture is
notoriously decreased when viewing a
teletext page.
Remote control does not function.
The
standby
indicator
on
the
projection
TV flashes even though the EPG is not
programmed to record.
Solution
•
Check the aerial connection.
•
Plug the TV in and press the
button on the front of the projection TV.
•
If the standby indicator
is on, press
TV
button on the remote control.
•
Using
the
menu
system,
select
the
“Picture
Adjustment”
menu
and
select
“Reset”
to return to the factory settings (see page 15).
•
Maybe
there
are
no
Digital
transmissions
in
your
area,
contact
a
local
installer
to
find out when digital transmissions begin in your area.
•
Contact
a
local
installer
to
find
out
at
which
transmitter
you
should
be
pointing
your aerial.
•
Change your aerial to cover the channels used by digital programmes. (Contact
a local installer).
•
Ensure aerial is correctly aligned to transmitter.
•
Ensure aerial is plugged directly into the TV (not through other equipment).
•
Check that the optional equipment is on and press the
button repeatedly on
the remote control until the correct input symbol is displayed on the screen (see
page 33).
• Press the
+ button on the remote control.
• Check that “TV Speakers” is “On” in the “Sound Adjustment” menu (see page
16).
• Check that headphones are not connected.
• Using the menu system, select the “Picture Adjustment” menu and select
“Reset” to return to factory settings (see page 15).
• This is not a malfunction. Press the number buttons on the remote control to
select the desired channel.
•
Adjust
the
colour
registration.
For
more
details,
please
refer
to
“Adjusting
Colour
Registration (Convergence)” section on page 10.
•
Using
the
menu
system,
select
the
“Manual
Programme
Preset”
menu
and
adjust
Fine Tuning (AFT) to obtain better picture reception (see page 20).
• Using the menu system, select the “Noise Reduction” option in the “Picture
Adjustment” menu and select “Auto”
to
reduce
the
noise
in
the
picture
(see
page
15).
• Turn off any equipment connected to the Scart connector on the rear of the
projection TV.
• This is not a malfunction. After 5 minutes viewing the same teletext page and
without
any
button
being
pressed,
the
projection
TV
automatically
decreases
the
brightness
level
to
avoid
any
damage
to
the
picture
tube.
To
reset
the
brightness
level, press any button of the remote control.
• Check that the Media Selector on the remote control is set to the device you are
using (VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD even when the Media
Selector has been set correctly. Enter the necessary code set as explained in the
“Remote Control Configuration for VCR/DVD” section on page 34.
• Replace the batteries.
• Contact your nearest Sony service centre.
Additional Information
Click on the first or last page to see other KP-44DX2U service manuals if exist.