Read Sony KP-44DX2U Service Manual online
– 13 –
KP-44DX2
RM-948
34
Remote Control Configuration for VCR/DVD
In
it’s
default
condition
this
remote
control
will
operate
the
basic
functions
of
this
Sony
TV,
Sony
DVDs
and
most
Sony
VCRs.
T
o
control VCRs and DVDs of other manufacturers (and some Sony VCR models), please complete the following steps:
•
Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below. On those brands that have
more than one code, enter the first code number.
VCR Brand List
DVD Brand List
Brand
Code
Brand
Code
SONY (VHS)
301, 302, 303, 308, 309
SONY
001
SONY (BETA)
303, 307, 310
AIWA
021
SONY (DV)
304, 305, 306
DENON
018, 027, 020, 002
AIWA
325, 331, 351
GRUNDIG
009, 028, 023, 024, 016, 003
AKAI
326, 329, 330
HITACHI
025, 026, 015, 004
DAEWOO
342, 343
JVC
006, 017
GRUNDIG
358, 355, 360, 361, 320, 351
KENWOOD
008
HITACHI
327, 333, 334
LG
015, 014
JVC
314, 315, 322, 344, 352, 353, 354, 348, 349
LOEWE
009, 028, 023, 024, 016, 003
LG
332, 338
MATSUI
013, 016
LOEWE
358, 355, 360, 361, 320, 351
ONKYO
022
MATSUI
356, 357
PANASONIC
018, 027, 020, 002
ORION
328
PHILIPS009, 028, 023, 024, 016, 003
PANASONIC
321, 323
PIONEER
004
PHILIPS
311, 312, 313, 316, 317, 318, 358, 359
SAMSUNG
011, 014
SAMSUNG
339, 340, 341, 345
SANYO
007
SANYO
335, 336
SHARP
019, 027
SHARP
324
THOMSON
012
THOMSON
319, 350
TOSHIBA
003
TOSHIBA
337
YAMAHA
018, 027, 020, 002
To do this:
1
Press the Media Selector button on the remote control repeatedly until the required green light (VCR or
DVD) is lit.
If Media Selector is on TV position, code numbers will not be stored.
2
Before
the
green
light
goes
out,
press
and
hold
the
YELLOW
button
for
approximately
6
seconds
until
the
green light starts flashing.
3
Whilst the green light is flashing, enter all three digits of the code for your brand of VCR or DVD using
the number buttons on the remote control.
If your selected code is entered correctly, all three green lights will be lit momentarily.
4
Turn on your VCR or DVD and check that the main functions work.
•
If
your
device
is
not
working
or
some
of
the
functions
do
not
work
please
check
that
you
entered
the correct code set or try the next code listed against the brand.
•
Your brand codes may be lost if weak batteries are not replaced within a few minutes. To reset
your
brand
of
DVD
or
VCR
please
repeat
the
above
steps.
A
small
label
is
added
inside
the
battery
door to allow you to record your brand codes.
•
Not all brands are covered and not all models of every brand may be covered.
5
When you wish to use the remote control to operate the TV again, press the Media Selector button until
the
TV
green
light
illuminates.
Don’t
forget
to
select
VCR
or
DVD
using
the
Media
Selector
button
every
time you wish to operate that equipment with this remote control.
Additional Information
35
GB
Optimum Viewing Area
For the best picture quality, try to position the projection TV so that you can view the screen from within the areas shown
below.
Horizontal viewing area
Vertical viewing area
20
20
60
60
m
in
im
u
m
d
ista
n
ce 1.7 m
(Optimum viewing position)
(Optimum viewing position)
minimum distance 1.7 m
Additional Information
Click on the first or last page to see other KP-44DX2U service manuals if exist.