Read Sony KE-P42MRX1 / KE-P50MRX1 Service Manual online
–
9
–
–
MRX1
RM-Y1012
Overview of the Media Receiver
Power on/
standby
indicator
standby
indicator
Timer indicator
“Memory Stick”
lamp
lamp
TV mode
button
button
*
If the “Logo illuminated”
in the “Features” menu is
set to “Yes” (see page 29),
all these indicators will be
illuminated and each
indicator will be only
underlined according to
your selection. If “Logo
illuminated” is set to
“No”, any of these
indicators will be
illuminated.
set to “Yes” (see page 29),
all these indicators will be
illuminated and each
indicator will be only
underlined according to
your selection. If “Logo
illuminated” is set to
“No”, any of these
indicators will be
illuminated.
Selecting Input
Source button
Source button
"Memory Stick"
access button
access button
Volume control
button (+/-)
button (+/-)
Programme Up
or Down button
(selects TV
channels)
or Down button
(selects TV
channels)
Headphones
jack
jack
PC Input C
connectors (video
and audio)
connectors (video
and audio)
Video Input
jack
jack
S Video
Input jack
Input jack
Audio Input
jacks
jacks
“Memory
Stick”
recording
indicator
Stick”
recording
indicator
TV indicator
Input
indicator (changes
according to the selected
input (see page 52).
indicator (changes
according to the selected
input (see page 52).
PC indicator
Menu button
OK
button
button
"Memory Stick"
slot
slot
*
Auto Start Up button
(starts the auto start up
sequence, see page 19)
(starts the auto start up
sequence, see page 19)
/
/
/
buttons
Press on the mark
.
q
On/off
switch
switch
Connecting the Display Unit to the Media Receiver
Unit
Unit
2
Connect the supplied mains lead to the display unit.
3
Only for KE-P42MRX1, KE-P50MRX1 and KE-P61MRX1:
To unplug the mains lead pull down the mains plug holder by pushing in both sides of the holder, then pull
out the plug.
out the plug.
4
Install the display unit using the specified wall-mount bracket or stand.
Before installing the display unit, check the installation instructions of your wall-mount bracket or stand.
• Use the supplied display interface cable.
• Use the supplied mains lead for the display unit (Type C-4, Type BF or Type C-5, see page 11).
• Use the supplied mains lead for the display unit (Type C-4, Type BF or Type C-5, see page 11).
1
Connect the supplied interface cable to the display unit and to the media receiver unit.
Location of the mains lead
connection may be separated from
the interface connections
depending on the model.
connection may be separated from
the interface connections
depending on the model.
Do not connect to
the mains before
all connections
are completed.
the mains before
all connections
are completed.
Location of the interface
connections may differ
depending on the model.
connections may differ
depending on the model.
Clip on the AC
IN jack until you
hear clicking.
IN jack until you
hear clicking.
Attach the mains plug holder
(supplied) to the mains lead.
(supplied) to the mains lead.
Click on the first or last page to see other KE-P42MRX1 / KE-P50MRX1 service manuals if exist.