KE-P42MRX1, KE-P50MRX1 - Sony TV Service Manual (repair manual). Page 11

A diagram appears showing you how to connect a wide range of 

equipment to your TV set. Follow the instructions and press the 
OK button to remove the picture and continue the automatic 
process. 

The connection diagram should be used as a guide only as 
most equipment can be connected to more than one type of 
TV socket. Once the TV has completed the automatic 
tuning process, refer to the ‘Connection Guide’ section on 
page 27 for further information on getting the best set up for 
your equipment.

The Auto Tuning menu appears on the screen. Press the OK 
button to select Yes.

The TV starts to automatically search and store all

 

available broadcast channels for you. 

 

This procedure could take some minutes. Please be  patient 

and do not press any buttons, otherwise automatic tuning 
will not be completed.

In some countries the TV Broadcaster installs the channels 

automatically (ACI system). In this case, the TV 
Broadcaster sends a menu in which you can select your city 
by pressing the

 v

 or 

V

 button and OK to store the 

channels.

If no channels were found during the auto tune process, a 

message appears automatically on the screen asking you to 
connect the aerial. Check the aerial connection (refer to 
page 18). Press the OK button to restart the auto tuning 
process.

After all available channels are captured and stored,

 

the Programme Sorting menu automatically appears

 

on the screen enabling you to change the order in

 

which the channels are stored.

If you wish to keep the broadcast channels in the tuned order, 

go to step 10.

If you wish to store the channels in a different order:

Press the

 v

 or 

V

 button to select the programme 

number with the channel (TV Broadcast) you wish

 

to move. Press the 

b

 button. 

Press the

 v

 or 

V

 button to select the new

programme number position for your selected

 

channel (TV Broadcast). Press the OK button to store. 

Repeat steps b)1 and b)2 if you wish to change 
the order of the other channels.

  

Press the MENU button to remove the menu from the screen

Auto Tuning

Programmes found:

4

No channel found.

Please connect aerial

Confirm

Programme Sorting

01

02

03

04

05

06

07

08

TVE

TVE2

TV3

C33

C27

C58

S02

S06

Programme Sorting

01

TVE

01

02

03

0

4

05

06

07

08

TVE

TVE2

TV3

C33

C27

C58

S02

S06

Do you want to start

automatic tuning?

Yes

No

OK

Please connect your equipment
according to this chart

DVD

Your TV set uses an On-Screen menu system to guide you through the operations. Use the following buttons 

on the Remote Control to operate the menu system: 

To switch on the menu screens:

Press the MENU button to switch the first level menu on.

Picture Adjustment

Select:

Enter:

OK

Exit:

MENU

Picture Mode:

Live

Contrast:

Reset:

Noise Reduction:

Auto

Colour Tone:

Normal

Picture Adjustment

Select:

Enter: OK

Exit: MENU

Picture Mode:

Live

Contrast:

Reset:

Noise Reduction:

Auto

Colour Tone:

Normal

• To highlight and select the desired menu or option, press

 v

 or 

V

.

• To enter the selected menu or option, press OK or 

b

.

• To return to the last menu or option, press OK or 

B

.

• To alter the settings of your selected option, press 

v

/

V

/

B 

or 

b

.

• To confirm and store your selection, press OK. 

Press the MENU button to remove the menu from the  screen.