KE-P42MRX1, KE-P50MRX1 - Sony TV Service Manual (repair manual). Page 13

The “Set Up” menu allows you to alter various 

options on this TV.

To do this: 
Press the MENU button and press 

v

 four times 

to select  

, then press OK to enter this menu. 

Next, press 

v

 or 

V

 to select the desired option 

and press OK. Finally, read below how to 
operate into each option.

LANGUAGE
This option allows you to select the language that menus are displayed in. 

To do this: 
After selecting the option, press OK and then proceed in the same way as in step 3 of the section 
"Switching On the TV and Automatically Tuning" on page 19. 

COUNTRY
This option allows you to select the country in which you wish to operate the TV set. 

To do this: 
After selecting the option, press OK and then proceed in the same way as in step 4 of the section 
"Switching On the TV and Automatically Tuning" on page 19. 

AUTO TUNING
This option allows you to automatically search for and store all available TV channels.

To do this: 
After selecting the option, press OK and then proceed in the same way as in the steps 7 and 8 of 
the section “Switching On the TV and Automatically Tuning” on page 20.

PROGRAMME SORTING
This option allows you to change the order in which the channels (TV Broadcast) appear on the 
screen. 

To do this: 
After selecting the option, press OK and then proceed in the same way as in the step 9 of the section 
“Switching On the TV and Automatically Tuning” on page 20.

,

m

Picture Adjustment

Select:

Enter:

OK

Exit:

MENU

Picture Mode:

Live

Contrast:

Reset:

Noise Reduction:

Auto

Colour Tone:

Normal

Select:

Exit:

MENU

Set Up

Language

English

Country

Off

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Enter:

OK

Set Up

Language

English

Country

Off

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Select:

Back:

Enter:

OK

continued...

 Press 

 to display PAP. 

 

• One of the screens will momentarily be pointed out 

with the symbol 

 to indicate that this is the active 

screen. It means that when you want to select the PAP 
source, you will be doing it in the active screen. This 
symbol will disappear after some seconds but it 
always can be displayed again by pressing the 

 

button.

• On the screen appears a banner guiding you how to 

operate PAP. This banner will disappear after some 
seconds but it always can be displayed again by 
pressing the 

 button.

 PAP mode is not available when viewing “Memory Stick” pictures, a PC input signal or 

a high definition signal (e.g. 576p signal from a DVD recorder).

 Press 

 again to remove PAP.

This is only possible if Media Selector is set to TV.

To change the active screen (framed), press the 

B

 or 

b

 buttons.

Press 

B

 or 

b

 to select the active screen.

 Once you have selected the active screen, press the number buttons or PROG +/- if you want to 

select a TV channel or press repeatedly the 

 button to watch the input signal of a connected 

equipment onto the active screen (for more details on which symbol you want to choose, please 
see section “Viewing pictures from equipment connected to the TV” on page 52).

Zooming the screens
With PAP switched on, press 

v

 or 

V

 to change the size of the two screens.

Selecting the sound
The sound of the active screen always comes from the TV set loudspeakers.
Besides that, you can listen to the active screen as well as the non active screen via headphones.

To do this:
With the PAP switched on, refer to the section "The Sound Adjustment Menu", select "Headphones 
Set Up" and set the option "

 PAP Sound" according your preference. For details see page 25.

 In PAP  (picture and picture) mode, the output from the Scart 

2/

 is fixed to the left 

picture.

Navegador

Configuración del Sistema

Aceptar

Versión

Select active picture:

Change size:

03

PAP divides the screen into two to watch two pictures simultaneously.