Read Sony KE-P42MRX1 / KE-P50MRX1 Service Manual online
– 7 –
MRX1
RM-Y1012
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
SECTION 1
GENERAL
Checking the Accessories supplied
2 Mains Leads (Type C-4):
Use these mains leads (with
safety earth) if you use the
set outside the United
Kingdom and Ireland.
safety earth) if you use the
set outside the United
Kingdom and Ireland.
2 Mains Leads (Type BF):
• Use these mains leads (with
safety earth) if you use the set
in the United Kingdom.
in the United Kingdom.
• See “NOTICE FOR
CUSTOMERS IN THE
UNITED KINGDOM and
IRELAND” on page 2
UNITED KINGDOM and
IRELAND” on page 2
when using these mains leads.
• These mains leads may not be
supplied depending on the
country.
country.
2 Mains Leads (Type C-5):
• Use these mains leads (with
safety earth) if you use the set
in the Swiss Confederation.
in the Swiss Confederation.
• These mains leads may not be
supplied depending on the
country.
country.
1 Mains Plug holder:
1 “Notes on Plasma” book.
1 Display Interface Cable:
1 AV Mouse:
Do not remove ferrite cores.
Do not remove ferrite cores.
GB
Do not remove ferrite cores.
1 Remote control
(RM-Y1012):
(RM-Y1012):
2 Batteries (AA size):
1 Cleaning cloth:
One Coaxial Cable:
1 PC Input Cable
Only for KE-P61MRX1:
(supplied with the display unit:
PDM-6110)
(supplied with the display unit:
PDM-6110)
• 2 Frame Bars
• 4 Screws
• 4 Screws
Only for KLV-L42MRX1:
(supplied with the display unit:
LDM:4210)
(supplied with the display unit:
LDM:4210)
• 2 Speaker jack covers
Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
Always remember to dispose of used batteries in an environmental friendly way.
Overview of the Display Unit
or
To operate the
remote control,
point it towards
this receiver.
remote control,
point it towards
this receiver.
Lights up in blue when
you press
you press
(picture off)
on the remote control to
switch off the picture.
Only the picture is
switched off (the sound
remains unchanged).
switch off the picture.
Only the picture is
switched off (the sound
remains unchanged).
Lights up when the
sleep timer is set. For
more details regarding
the sleep timer, refer to
“
more details regarding
the sleep timer, refer to
“
Timer” on
page 30.
Lights up in green when the
TV is switched on. When in
standby mode, the indicator
lights up in red. When in PC
power saving* mode, the
indicator lights up in yellow.
TV is switched on. When in
standby mode, the indicator
lights up in red. When in PC
power saving* mode, the
indicator lights up in yellow.
*If the TV is connected to a
personal computer or video graphic
board that is DPMS
(Display Power Management
System) compliant, the TV will
automatically reduce power
consumption (PC power saving
mode).
personal computer or video graphic
board that is DPMS
(Display Power Management
System) compliant, the TV will
automatically reduce power
consumption (PC power saving
mode).
When a personal computer is
connected to the PC
connected to the PC
socket, the
TV will switch into PC power
saving mode, rather than standby
mode.
mode.
Click on the first or last page to see other KE-P42MRX1 / KE-P50MRX1 service manuals if exist.