Read Sony KDS-50A3000 / KDS-55A3000 / KDS-60A3000 Service Manual online
KDS-50A3000/55A3000/60A3000
KDS-50A3000/55A3000/60A3000
15
1-8. DIFFUSION PLATES (SCREENS) REMOVAL
1 Remove a total of 12 screws, +BVTP2 4x16
2 screws from the Top Holder,
8 screws from the Bottom Holder and
1 screw from each of the side holders.
8 screws from the Bottom Holder and
1 screw from each of the side holders.
2 Gently pull the screens from the Screen Frame Assembly
to dislodge from the double sided tape.
CAUTION:
The screens are adhered to the Screen Frame Assembly with double sided tape (3-275-118-21). After removing the screens, use rubbing
alcohol to gently clean the area to remove any excess tape. The double sided tape must be replaced before mounting the screens to the
Screen Frame Assembly to ensure that they are securely attached. The illustration below indicates the approximate location of the double
-side tape. For complete details, refer to the Sony Electronics Service Information website.
The screens are adhered to the Screen Frame Assembly with double sided tape (3-275-118-21). After removing the screens, use rubbing
alcohol to gently clean the area to remove any excess tape. The double sided tape must be replaced before mounting the screens to the
Screen Frame Assembly to ensure that they are securely attached. The illustration below indicates the approximate location of the double
-side tape. For complete details, refer to the Sony Electronics Service Information website.
Diffusion Plate
(Lenticular - Front side)
TAPE, PE 100
(3-275-116-01)
1 piece on each corner area
Diffusion Plate
(Frensnel - Rear side)
Note:
The following diagram illustrate the taping method when replacing the diffusion Plates.
For Part Numbers refer to the Explode view section of this manual.
The following diagram illustrate the taping method when replacing the diffusion Plates.
For Part Numbers refer to the Explode view section of this manual.
Screen Holders
Diffusion Plates
Screen Frame Assembly
Double Sided Tape
(10mm x 100mm)
Double Sided Tape
(2 pieces, 1 piece on each side)
2 x (10mm x 500mm) (KDS-50A3000 Only)
2 x (10mm x 550mm) (KDS-55A3000/60A3000 Only)
1
2
Click on the first or last page to see other KDS-50A3000 / KDS-55A3000 / KDS-60A3000 service manuals if exist.