Read Sony KDS-50A3000 / KDS-55A3000 / KDS-60A3000 Service Manual online
KDS-50A3000/55A3000/60A3000
KDS-50A3000/55A3000/60A3000
18
2-4. USING THE REMOTE COMMANDER TO
VIEW SERVICE DATA
Use the buttons on the Remote Commander to access the service menu
items and adjust the data values.
items and adjust the data values.
VCENT
BEM
SERVICE
0003
6
0016 TG
DIFF
1
Service
Menu
Menu
Category
Adjustment
Item
Item
Item
Numbers
Numbers
Data Value
RM-YD016
Display
Next Category
Next Category
Display
Previous Item
Previous Item
Increase
Data Value
Data Value
Decrease
Data Value
Display
Previous
Category
Data Value
Display
Previous
Category
Display
Next Item
Next Item
Displays
Service Menus
Service Menus
MUTING
JUMP
Saves data
Writes data
into memory
into memory
Read data
9
0
5
6
3
1
2
4
2-5. ADJUSTING H/V CENTER
Check the picture horizontal/vertical center after replacing the Optics
Unit Block or Rear Cover.
Unit Block or Rear Cover.
1. Check the H/V center using a 480i monoscope signal with the TV in
“FULL’ model.
2. If the center is shifted, proceed to step 3.
3. Access the Service Menu by pressing the following buttons on the
Remote Commander within a second:
DISPLAY
Channel
5
Volume
+
TV POWER .
The service menu displays.
4. Press the
JUMP
button until the BEM micro service menu displays.
BEM
SERVICE
BOOT: 1.
001W00AU
MAIN: 1. 010W00AU
DATA: 1. 011A00SUA
NVM: 1. 011
5. Press 2 until the 0016 TG category displays.
BEM
SERVICE
0001
0
0016 TG
DIFF
1
6. Press 1 until the 0003 VCENT item displays.
VCENT
BEM
SERVICE
0003
6
0016 TG
DIFF
1
7. Press 3 to increase (shift VCENT up), or press 6 to decrease the
value (shift VCENT down) until the correct adjustment is set.
8. Press 1 until the 0004 HCENT item displays.
0004
5
HCENT
BEM
SERVICE
0016 TG
DIFF
1
9. Press 3 to increase (shift HCENT right), or press 6 to decrease the
value (shift HCENT left) until the correct adjustment is set.
10. To write into memory, press MUTING then 0 on the Remote
Commander.
2-6. EXITING SERVICE MODE
After completing the changes, exit service mode.
1. To exit service mode, turn the power off by pressing POWER .
Wait 2 minutes before restarting the set to allow the fans to
completely shut down or the Service Menu will appear on the screen.
completely shut down or the Service Menu will appear on the screen.
Click on the first or last page to see other KDS-50A3000 / KDS-55A3000 / KDS-60A3000 service manuals if exist.