Read Sony KDS-50A3000 / KDS-55A3000 / KDS-60A3000 Service Manual online
KDS-50A3000/55A3000/60A3000
KDS-50A3000/55A3000/60A3000
12
1-4. H2 BOARD, SPEAKER, AND SEPARATOR REMOVAL
1-5. FRONT
BRACKET
REMOVAL
1 Disconnect joint connector from the H2 board.
2 Remove 2 screws for H2 board removal,
2 Remove 2 screws for H2 board removal,
+BVTP 3x12 TYPE2 IT-3
3 Disconnect joint connector from the Speakers.
4 Remove 4 screws from the Speakers, +BWTP2 4x16
5 Remove 6 screws from the Separator, +BVTP2 4x16
6 Lift two tabs and slide out the Separator unit.
4 Remove 4 screws from the Speakers, +BWTP2 4x16
5 Remove 6 screws from the Separator, +BVTP2 4x16
6 Lift two tabs and slide out the Separator unit.
1 Release all connector wire from Clamps on the Front Bracket.
2 Remove 2 screws from the Duct and the TUU2 Shield,
2 Remove 2 screws from the Duct and the TUU2 Shield,
+BVST 3x6
3 Remove 2 screws from the Chassis block,
+BVTP2 4x16
6
4
3
2
1
5
Rear Cabinet
Separater
Speaker
Speaker
H2 Board
1
3
2
Duct (Front)
FB1 Shield (Bottom)
TUU2 Shield
Front Bracket
☛
☛
Click on the first or last page to see other KDS-50A3000 / KDS-55A3000 / KDS-60A3000 service manuals if exist.