Read Sony KDL-W40A11E Service Manual online
– 12 –
AT2X
RM-ED001
Switches off the picture. You can still listen to the sound with the picture off.
1
Press OK to select “Picture Off”.
2
Press
M/m to select “On”, then press OK.
The
(Picture Off) indicator on the TV (front) lights up in green. To restore the
picture, press any buttons (except
2 +/- and 9).
Illuminates the SONY logo on the TV (front).
1
Press OK to select “Logo Illumination”.
2
Press
M/m to select “Yes”, then press OK.
Picture Off
Logo Illumination
Timer menu
Sets a period of time after which the TV automatically switches itself into standby mode.
1
Press OK to select “Sleep Timer”.
2
Press
M/m to select the desired time period (“30min”/“60min”/“90min”/
“120min”), then press OK.
The
(Timer) indicator on the TV (front) lights up in orange.
Tips
• If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.
• “Sleep timer will end soon. Power will be turned off.” appears on the screen one minute before
• “Sleep timer will end soon. Power will be turned off.” appears on the screen one minute before
the TV switches to standby mode.
• If you press
/
, the remaining time in minutes before the TV switches to standby mode is
displayed on the screen.
Sets the TV to switch to standby mode automatically when you select the input source and
there is no input signal from connected equipment.
In TV mode, this Auto Shutoff function is always set to “On”.
there is no input signal from connected equipment.
In TV mode, this Auto Shutoff function is always set to “On”.
1
Press OK to select “Auto Shutoff”.
2
Press
M/m to select “On”, then press OK.
You can select the options listed below on the Timer
menu. To select options, see “Navigating through
menus” (page 21).
menu. To select options, see “Navigating through
menus” (page 21).
Sleep Timer
Auto Shutoff
Click on the first or last page to see other KDL-W40A11E service manuals if exist.