Read Sony KDL-40ZX1 Service Manual online
- 9 -
EG1W SELF DIAGNOSTIC SOFTWARE
The identification of errors within the EG1W chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the
event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous
flashing LED) and then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant
device number will be displayed through the LED (Series of flashes which must be counted).
event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous
flashing LED) and then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant
device number will be displayed through the LED (Series of flashes which must be counted).
Media Receicer LED Error Codes and Descriptions
Monitor LED Error Codes and Descriptions
Number of LED
Flashes
Error Description
02
POWER_DET
08
Audio Error
10
Digital Error.
11
NVM Error.
12
I2C Error VCT.
13
I2C CH1 (VERD NVM/RTC)
14
HDMI Error.
15
Tuner Error
16
RF Module Error
17
Riviera Error
18
Digital Demod.
19
USB Error
20
CI Error
21
VCT Error
22
MSP Error.
Number of LED
Flashes
Error Description
02
Main Power Error
03
DC_ALERT1
05
PANEL_ALERT
06
Inverter Error
07
Internal Temperature Error
08
Audio Error
11
Trident Error.
12
FRC Error
13
Balancer Error
14
TCON Error
16
RF Module Error
17
Media Box Error.
Click on the first or last page to see other KDL-40ZX1 service manuals if exist.