Read Sony KDL-40ZX1 Service Manual online
- 11 -
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8 (3 Screws)
SECTION 2 DISASSEMBLY
2-1-1. Top Cover Removal
2-1-2. Bezel Assy Removal (Step 1)
2-1-3. Bezel Assy Removal (Step 2)
Remove the 2 screws circled release the clip indicated and
remove the bezel assy gently from the bracket Pwb.
remove the bezel assy gently from the bracket Pwb.
Screw Part number(s) and Description(s)
7-685-781-09 SCREW + PTT 2X4 (S) (2 Screws)
2
2-1-4. Bracket, Pwb Removal
To remove the ‘Top Cover’ firstly very carefully remove the
‘Side CN Cover’ as indicated.
Then remove the 3 screws circled and slide the top cover to
the rear of the media receiver and lift upwards.
‘Side CN Cover’ as indicated.
Then remove the 3 screws circled and slide the top cover to
the rear of the media receiver and lift upwards.
Release the 4 clips, 2 on the top and 1 on each side and ease
the Bezel assy gently away from the media receiver.
the Bezel assy gently away from the media receiver.
To remove the Bracket, Pwb release the wire clamp
indicated, disconnect 5 pop connectors indicated, disconnect
the connector indicated and remove the Bracket Pwb from
the media receiver.
indicated, disconnect 5 pop connectors indicated, disconnect
the connector indicated and remove the Bracket Pwb from
the media receiver.
2-1. MEDIA RECEIVER
Clips
Clip
Wire Clamp
Pop
Connectors
Connectors
Connector
Side CN
Cover
Cover
Click on the first or last page to see other KDL-40ZX1 service manuals if exist.