Read Sony KDL-40R355B Service Manual online
KDL-40R355B 15
SECTION 3 - REPAIR INFORMATION
16. Press
or
to select characters and then to move to the next
space until Model Name is complete.
NOTE
: Make sure to include dash in Model Name.
>>
Self diagnosis history
>>
Wide Band Tuning
>>
LVDS Spectrum (%)
29
Tuning System
Auto
Status Digital RF Information
Off
Off
Low of HPD
5
UART Selection
Factory
TEST RESET
[</>]Set [Home] Exit
Service Mode
NS4S400DND1101
Status Information
<[
]>
<[
]>
<[
]>
<[
]>
<[
]>
<[
]>
Off
Panel Selection
SERIAL NUMBER EDIT
MODEL NAME EDIT
KDL-40R355B
2000001
CAUTION: The Model Name can only be selected once. Be sure
to verify the information is correct before saving the changes.
17.
When the complete Model Name displays, press
.
18.
On the confirmation screen, press to select
YES and then
.
Input Data Correct?
Yes
No
Selected text displays in black
19. Press
POWER
to exit
Service Mode.
REMOVING THE PANEL ORNAMENTAL
1.
Locate and remove 1 screw, then slide the Panel Ornamental from
the left side to detach it as shown.
REMOVING THE H BOARD
2.
Disconnect the connector from the H Board as shown.
3. Lift the H Board from the left side and refer to the illustration to make
sure its been detached, then lift it to remove.
Click on the first or last page to see other KDL-40R355B service manuals if exist.