Read Panasonic KX-TS2350CAB / KX-TS2350CAC / KX-TS2350CAH / KX-TS2350CAR / KX-TS2350CAW Service Manual online
KX-TS2350CAB
KX-TS2350CAC
KX-TS2350CAH
KX-TS2350CAR
KX-TS2350CAW
KX-TS2350CAC
KX-TS2350CAH
KX-TS2350CAR
KX-TS2350CAW
Integrated Telephone System
Black Version
Blue Version
Gray Version
Red Version
White Version
(for Kazakhstan)
(for Uzbekistan)
Telephone Equipment
ORDER NO. KM40608170CE
1
ABOUT LEAD FREE SOLDER (PbF: Pb free)
3
1.1.
Suggested PbF Solder
3
1.2.
How to Recognize that Pb Free Solder is Used
4
2
FOR SERVICE TECHNICIANS
5
3
OPERATING INSTRUCTIONS
6
3.1.
Location of Controls
6
3.2.
Connection
6
3.3.
Troubleshooting
6
4
DISASSEMBLY INSTRUCTIONS
7
5
TROUBLESHOOTING GUIDE
8
5.1.
Service Hints
8
5.2.
Pulse Dialing Problems
8
5.3.
Problems With the Handset
9
5.4.
Tone Dialing Problems
9
5.5.
Problems With Ringer
10
5.6.
How to Check IC1 (Scanning to the key)
11
6
BLOCK DIAGRAM
12
7
CIRCUIT OPERATIONS
13
7.1.
Telephone Line Interface and Pulse Dial Circuit
13
7.2.
Tone Dial Circuit
13
7.3.
Power Circuit and Redial Back-up Circuit
14
8
OPTION JUMPER TABLE
15
9
CPU DATA
16
10 CABINET AND ELECTRICAL PARTS LOCATION
17
11 ACCESSORY AND PACKING MATERIALS
18
12 TERMINAL GUIDE OF ICs TRANSISTORS AND DIODES
19
13 REPLACEMENT PARTS LIST
20
13.1. Base Unit
20
13.2. Accessories and Packing Materials
21
14 FOR SCHEMATIC DIAGRAM (SCHEMATIC DIAGRAM)
23
15 SCHEMATIC DIAGRAM
24
16 CIRCUIT BOARD
27
16.1. Main (Component View)
27
16.2. Main (Flow Solder Side View)
28
16.3. Operation (Flow Solder Side View)
29
Note:
Because section 3 of this manual is an extract from the operating instructions for this model, it is subject to change without notice.
You can download and refer to the original operating instructions on TSN Server for further information.
You can download and refer to the original operating instructions on TSN Server for further information.
CONTENTS
Page
Page
2
KX-TS2350CAB / KX-TS2350CAC / KX-TS2350CAH / KX-TS2350CAR / KX-TS2350CAW
1 ABOUT LEAD FREE SOLDER (PbF: Pb free)
Note:
In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that
contains lead.
contains lead.
We will use PbF Solder when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn),
Silver (Ag), and Copper (Cu).
Silver (Ag), and Copper (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
work we suggest using the same type of solder.
Caution
•
•
•
•
PbF solder has a melting point that is 50°F ~70°F (30°C ~ 40°C) higher than Pb solder. Please use a soldering iron with
temperature control and adjust it to 700°F ± 20°F (370°C ± 10°C).
temperature control and adjust it to 700°F ± 20°F (370°C ± 10°C).
•
•
•
•
Exercise care while using higher temperature soldering irons.:
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
•
•
•
•
PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100°F (600°C).
•
•
•
•
When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
opposite side (See the figure below).
opposite side (See the figure below).
1.1. Suggested PbF Solder
There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper
(Sn+Ag+Cu), you can also use Tin and Copper (Sn+Cu) or Tin, Zinc, and Bismuth (Sn+Zn+Bi). Please check the
manufacturer’s specific instructions for the melting points of their products and any precautions for using their product with other
materials.
(Sn+Ag+Cu), you can also use Tin and Copper (Sn+Cu) or Tin, Zinc, and Bismuth (Sn+Zn+Bi). Please check the
manufacturer’s specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3 mm, 0.6 mm and 1.0 mm.
3
KX-TS2350CAB / KX-TS2350CAC / KX-TS2350CAH / KX-TS2350CAR / KX-TS2350CAW
1.2. How to Recognize that Pb Free Solder is Used
(Example: Main P.C.B.)
IC2
1
3
1
1
4
8
5
IC1
28
CN1
1
2
3
4
5
6
7
8
9 10 11 12
PbF
Marked
(Component View)
Note:
The location of the “PbF” mark is subject to change without notice.
4
KX-TS2350CAB / KX-TS2350CAC / KX-TS2350CAH / KX-TS2350CAR / KX-TS2350CAW