Read Sony DPF-HD1000 / DPF-HD700 / DPF-HD800 Service Manual online
DPF-HD700/HD800/HD1000
– 5 –
1-3. DPF-HD1000
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
101
A-1843-082-A FRONT CASE ASSY B SERVICE (BLACK)
101
A-1843-083-A FRONT CASE ASSY W SERVICE (WHITE)
102
A-1843-080-A MAIN BOARD, COMPLETE (for SERVICE)
103
3-080-205-21
SCREW, TAPPING, P2 (SILVER) (for WHITE)
103
3-080-206-21
SCREW, TAPPING, P2 (BLACK) (for BLACK)
104
4-295-882-01 VIEW
BUTTON
B SERVICE (VIEW MODE, 1) (BLACK)
104
4-295-882-11
VIEW BUTTON W SERVICE (VIEW MODE, 1) (WHITE)
105
4-295-883-01
LIGHT GUIDE (STAND-BY) SERVICE
106
A-1843-084-A REAR CASE ASSY B SERVICE (BLACK)
106
A-1843-085-A REAR CASE ASSY W SERVICE (WHITE)
107
4-295-881-01
ENTER BUTTON B SERVICE (BLACK)
107
4-295-881-11
ENTER BUTTON W SERVICE (WHITE)
108
4-295-884-01
4 DIRECTION BUTTON B SERVICE
(b, v, B, V, MENU, BACK) (BLACK)
108
4-295-884-11
4 DIRECTION BUTTON W SERVICE
(b, v, B, V, MENU, BACK) (WHITE)
109
9-913-402-43
POLYIMIDE SHEET, t=0.075 (for SERVICE)
110
J-2501-274-A
FIRAMENT TAPE (12 mm) (T0.18 mm) (for SERVICE)
IR901
A-1843-090-A IR RECEIVER ASSY SERVICE
J602
4-141-818-01
SERVICE DC JACK (DC IN 5V
)
LCD901 A-1843-081-A LCD
ASSY
SERVICE
LP901
A-1843-091-A LOGO PIPE ASSY SERVICE
SP901 A-1843-089-A SPEAKER
ASSY
SERVICE
Note
Note1:
Follow the disassembly procedure in the numerical order given.
3 two claws
3 two claws
4 Remove all claws while rounding in outer.
3 three claws
3 three claws
5
6 front case assy
– Rear bottom view –
– Front bottom view –
1 two tapping screws
(P2)
1 two tapping screws
(P2)
JIG
When disassembling the set,
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
2 Insert the jig in the space between the front
cover and the rear cover assy and remove.
Note: Please spread a sheet under a
unit not to injure front panel.
Note2: Position where speaker assy (SP901)
is installed.
Match the ditch of the speaker
assy (SP901) to the rib of the
rear case.
assy (SP901) to the rib of the
rear case.
Note7: The mount parts other than DC jack
cannot exchange it alone. When the
mount parts other than DC jack are
defective, exchange the complete
mounted board.
mount parts other than DC jack are
defective, exchange the complete
mounted board.
Note3: How to install the MAIN board.
1 Insert two USB jacks
in the rear case.
MAIN board
2
Note4: Position where logo pipe assy (LP901)
is installed.
Match the ditch of the corner of the logo pipe
assy (LP901) tothe rib of the rear case.
assy (LP901) tothe rib of the rear case.
Note5: Please cut out and use POLYIMIDE
SHEET for a specified size when you
exchange it for new parts.
exchange it for new parts.
As for this part, the material or thickness
might be different compared with before.
might be different compared with before.
However, there is no obstacle at all.
50 mm
35 mm
20 mm
18 mm
Note6: Please cut out and use FIRAMENT
TAPE for a specified size when you
exchange it for new parts.
exchange it for new parts.
As for this part, the material or
thickness might be different compared
with before.
thickness might be different compared
with before.
However, there is no obstacle at all.
30 mm
12 mm
LCD901
MAIN board
IR901
J602
103
103
104
105
107
108
103
LP901
(Note 4)
(Note 4)
SP901
(Note 2)
(Note 2)
101
(Note 1)
106
(Note 1)
102
(Note 3, 7, 8)
109
(Note 5)
110
(Note 6)
Note8: When the MAIN board in this
unit is replaced, it is necessary
to set destination. Execute the
setting of destination referring to
“DESTINATION SETTING” (page 6).
to set destination. Execute the
setting of destination referring to
“DESTINATION SETTING” (page 6).
Click on the first or last page to see other DPF-HD1000 / DPF-HD700 / DPF-HD800 service manuals if exist.