DPF-HD1000, DPF-HD700, DPF-HD800 - Sony Other Service Manuals Service Manual (repair manual)

dpf-hd1000, dpf-hd700, dpf-hd800 service manual
Model
DPF-HD1000 DPF-HD700 DPF-HD800
Pages
6
Size
999.16 KB
Type
PDF
Document
Service Manual
Brand
Device
Other Service Manuals
File
dpf-hd1000-dpf-hd700-dpf-hd800.pdf
Date

Read Sony DPF-HD1000 / DPF-HD700 / DPF-HD800 Service Manual online

Ver.
Date
History
Contents
S.M.Rev
issued
DPF-HD700/HD800/HD1000
Sony Corporation
SERVICE MANUAL
Revision History
989326703.pdf
2013A33-1
  © 2013.01
Published by Sony Techno Create Corporation
Ver. 1.2  2013.01
DIGITAL PHOTO FRAME
9-893-267-03
US Model
AEP Model
Australian Model
Chinese Model
Taiwan Model
Korean Model
DPF-HD800/HD1000
Canadian Model
Tourist Model
DPF-HD1000
E Model
DPF-HD700/HD800/HD1000
Brazilian Model
Japanese Model
DPF-HD800
Photo: DPF-HD1000
1.0
1.1
1.2
2011.07
2012.06
2013.01
Official Release
Supplement-1
S1 (SMR-12019)
Supplement-2
S1 (SMR-12064)
•  Change of Repair Parts Accompanying Change of LCD
 (DPF-HD800 
only)
S.M. Revised:  Top cover
Page 4
 on original service manual
•  Addition of Japanese model (DPF-HD800)
•  Deletion of US, Taiwan and Korean models (DPF-HD700)
•  Change of Part No. for AC ADAPTOR
S.M. Revised:  Top cover
Page 6
 on original service manual
   
 
Top cover
 on supplement-1
Yes
Yes
RMT-DPF10
DPF-HD700/HD800/HD1000
Ver. 1.2 2013.01
The changed portions from 
Ver. 1.1 are shown in blue.
DPF-HD800の日本向けは追加-2を参照してください。
DPF-HD700/HD800/HD1000
– 2 –
SPECIFICATIONS
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0 OR DOTTED LINE WITH 
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST 
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS 
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY 
SONY. 
ATTENTION AU  COMPOSANT  AYANT  RAPPORT 
À  LA  SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 
0 SUR LES 
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT 
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT 
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES 
SUPPLÉMENTS PUBLIÉS PAR SONY.
LCD screen
LCD panel: 
DPF-HD1000: 25.7 cm/10.1-inches, TFT active matrix
DPF-HD800: 20 cm/8-inches, TFT active matrix
DPF-HD700: 18 cm/7-inches, TFT active matrix
Total number of dots: 
DPF-HD1000: 1,843,200 dots (1,024 × 3(RGB) × 600 dots)
DPF-HD800/HD700: 1,152,000 dots (800 × 3(RGB) × 480 dots)
LCD backlight life
20,000 hours (before brightness of the backlight is reduced to half)
Input/Output connectors
USB connector (Type Mini-B, Hi-Speed USB)
USB connector (TypeA, Hi-Speed USB)  
“Memory Stick PRO” (Duo)/SD memory card slots
Compatible file formats
*1
Still image
JPEG: DCF 2.0, Exif 2.3, MPF baseline and MPF extended
 *2
, JFIF
TIFF: Exif 2.3 compatible
BMP: 1, 4, 8, 16, 24, 32 bit Windows format
RAW
 *3
: SRF, SR2, ARW 2.2 (preview only)
Movie
*4*5*6
MPEG-4 AVC/H.264:
Extension: mp4, mts
Profile: Baseline Profile, Main Profile, High Profile
Level: lower than 4.2
Maximum resolution: 1920 × 1080
Audio format: Dolby Digital, AAC
MPEG-4 Visual:
Extension: mp4
Profile: Simple Profile, Advanced Simple Profile, Advanced Coding 
Efficiency Profile
Level: lower than 6 (Simple Profile), less than 5 (Advanced Simple 
Profile), less than 4 (Advanced Coding Efficiency Profile)
Maximum resolution: 1280 × 720
Audio format: AAC-LC
MPEG-1 Video:
Extension: mpg
Maximum resolution: 720 × 576
Audio format: MPEG-1 Audio Layer 2
Motion JPEG:
Extension: mov, avi 
Maximum resolution: 1280 × 768
Audio format: Linear PCM, μ-law, IMA-ADPCM
Maximum bit rate: 28 Mbps
Maximum frame rate: 60p
Background music
*4
MP3: 
Extension: mp3
Bit rate: 32 kbps to 320 kbps, Supports variable bit rate (VBR)
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
AAC:
Extension: m4a
Bit rate: 32 kbps to 320 kbps, Supports variable bit rate (VBR)
Sampling frequency: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 
kHz, 32 kHz, 44.1 kHz, 48 kHz
Linear PCM:
Extension: wav
Sampling frequency: 44.1 kHz, 48 kHz
 Photo frame
Maximum picture elements
*7
16,384 × 12,288 (Progressive JPEG can be played up to 22,000,000 pixels.)
File system
FAT12/16/32/exFAT
Maximum number of files that can be handled
9,999 files for a memory card/an internal device
Internal memory capacity
*8
2 GB (Approx. 4,000 images
*9
 can be saved.)
Power requirements
DC IN jack, DC 5V
Power consumption
DPF-HD1000
[With the AC adaptor]
At the maximum load: 11.3 W, normal mode: 6.3 W
[Without the AC adaptor]
At the maximum load: 8.5 W
DPF-HD800
[With the AC adaptor]
At the maximum load: 10.7 W, normal mode: 5.5 W
[Without the AC adaptor]
At the maximum load: 8.5 W
DPF-HD700
[With the AC adaptor]
At the maximum load: 10.1 W, normal mode: 5.0 W
[Without the AC adaptor]
At the maximum load: 8.0 W
*  The definition of the normal mode is a status which allows the performance 
of a slideshow using images stored in the internal memory with the default 
settings without inserting a memory card or connecting an external device.
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Dimensions
[With the stand spread out]
DPF-HD1000
Approx. 258 mm × 177.6 mm × 122.9 mm (10 
× 4 
th/height/depth)
DPF-HD800
Approx. 220 mm × 151.4 mm × 117.8 mm (8 
× 4 
th/height/depth)
DPF-HD700
Approx. 191 mm × 132.4 mm × 97.4 mm (7 
th/height/depth)
Mass
DPF-HD1000: Appro
DPF-HD800: Approx. 490 g (1 lb 1 
DPF-HD700: Approx. 370 g (13 oz)
(excluding the AC adaptor, including the stand)
Included items
Power requirements
 100 V to 240 V, 50 Hz/60 Hz 0.4 A
Rated output voltage
 5 V, 2.2 A
Dimensions
Appro
(width/height/depth)(excluding the protruding parts)
Mass
Appro
See the label of AC adaptor for more details.
Design and specifications are subject to change without 
notice.
Manufactured under license from Dolby Laboratories.
*1: Some of the files may not be compatible depending on the type of data.
*2: Files cannot be displayed in 3D. Representative images are displayed in 2D.
*3: RAW files of a Sony α camera are displayed as thumbnail preview.
*4: Files with copyright protection cannot be played.
*5: Frames may be dropped during playback of a memory card due to the 
transfer rate of the memory card.
*6: Number of frames shown may be reduced during playback of some movie 
files.
*7: 17 × 17 or more are required. An image with an aspect ratio of 20:1 or more 
may not be displayed properly. Even if the aspect ratio is less than 20:1, 
display problem may occur in thumbnails, slideshow or other occasions.
*8: When measuring media capacity, 1 GB equals  1,000,000,000 bytes, a 
portion of which is used for data management and/or application files. The 
capacity that a user can use is approximately 1.8 GB.
*9: The number of stored images is an approximate guide when resizing and 
importing images.
 
When resizing and importing images, they are automatically resized to 
about 2,000,000 pixels. This varies depending on the subject and shooting 
conditions.
 AC adaptor (AC-P5022)
s 2emote control (1)
s 3tand (1)
s !C adaptor (1)
s /perating Instructions (1)
s #$ 2/-
, Cyber-shot, 
, “Memory Stick”, and 
 are trademarks or registered trademarks of Sony 
Corporation.
Microsoft, Windows, and Windows Vista are registered 
trademarks of Microsoft Corporation in the United 
States and/or other countries.
Macintosh and Mac OS are registered trademarks of 
Apple Inc.. in the United States and/or other countries. 
SD Logo, SDHC Logo, SDXC Logo are trademarks of 
SD-3C, LLC.
Contains iType
TM
 and fonts from Monotype Imaging 
Inc. 
iType
TM
 is a trademark of Monotype Imaging Inc.
Dolby is trademark of Dolby Laboratories.
MPEG Layer-3 audio coding technology and patents 
licensed from Fraunhofer IIS and Thomson.
All other companies and product names mentioned 
herein may be the trademarks or registered trademarks 
of their respective companies. Furthermore, “TM” and 
®
” are not mentioned in each case in this manual.
Unleaded solder
Boards requiring use of unleaded solder are printed with the leadfree 
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the 
lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•   Unleaded solder melts at a temperature about 40°C higher than ordi-
nary solder.
Ordinary soldering irons can be used but the iron tip has to be applied 
to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to about 
350°C.
Caution:  The printed pattern (copper foil) may peel away if the heated 
tip is applied for too long, so be careful!
•   Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than 
ordinary solder so use caution not to let solder bridges occur such as 
on IC pins, etc.
•   Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may also be 
added to ordinary solder.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the following 
safety checks before releasing the set to the customer.
1.  Check the area of your repair for unsoldered or poorly-soldered 
connections. Check the entire board surface for solder splashes and 
bridges.
2.  Check the interboard wiring to ensure that no wires are “pinched” 
or contact high-wattage resistors.
3.  Look for unauthorized replacement parts, particularly transistors, 
that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.
4.  Look for parts which, through functioning, show obvious signs of 
deterioration. Point them out to the customer and recommend their 
replacement.
5.  Check the B+ voltage to see it is at the values specified.
6.  Flexible Circuit Board Repairing
 
•   Keep the temperature of the soldering iron around 350°C during 
repairing.
 
•   Do not touch the soldering iron on the same conductor of the circuit 
board (within 3 times).
 
•   Be careful not to apply force on the conductor when soldering or 
unsoldering.
Model
Destination
Color
Black
White
Red
DPF-HD700
E (Except Middle East, Hong Kong, Korean and Chinese etc.)
z
z
z
Middle East and Hong Kong
z
z
z
DPF-HD800
US
z
AEP
z
z
East European
z
E (Except Middle East, Hong Kong, Korean and Chinese etc.)
z
Latin American
z
z
Middle East and Hong Kong
z
z
Brazillian
z
Taiwan
z
Korean
z
Australian
z
Chinese
z
z
DPF-HD1000
US
z
Canadian
z
AEP
z
East European
z
E (Except Middle East, Hong Kong, Korean and Chinese etc.)
z
Latin American
z
z
Middle East and Hong Kong
z
z
Taiwan
z
Korean
z
Australian
z
Chinese
z
z
Tourist
z
• COLOR 
VARIATION
DPF-HD700/HD800/HD1000
– 3 –
Note:
•  -XX and -X mean standardized parts, so 
they may have some difference from the 
original one.
•  Items marked “*” are not stocked since 
they are seldom required for routine ser-
vice. Some delay should be anticipated 
when ordering these items.
•  The mechanical parts with no reference 
number in the exploded views are not sup-
plied.
•  Color Indication of Appearance Parts Ex-
ample:
  KNOB, BALANCE (WHITE) . . . (RED)
   
 
 
   
 
Parts Color  Cabinet’s Color
•  Refer to “COLOR VARIATION” on page 2 
about color variation of model and destina-
tion.
1-1. DPF-HD700
Ref. No. 
Part No. 
Description
Ref. No. 
Part No. 
Description
  1 
A-1843-069-A  FRONT CASE ASSY B SERVICE (BLACK)
  1 
A-1843-070-A  FRONT CASE ASSY W SERVICE (WHITE)
  1 
A-1843-071-A  FRONT CASE ASSY R SERVICE (RED)
  2 
A-1843-067-A  MAIN BOARD, COMPLETE (for SERVICE)
  3 
3-080-205-21 
SCREW, TAPPING, P2 (SILVER) (for WHITE)
  3 
3-080-206-21 
SCREW, TAPPING, P2 (BLACK) (for BLACK, RED)
  4 
4-295-882-01 
VIEW BUTTON B SERVICE (VIEW MODE, 1) 
(BLACK) (for BLACK, RED)
  4 
4-295-882-11 
VIEW BUTTON W SERVICE (VIEW MODE, 1) 
(WHITE) (for WHITE)
  5 
4-295-883-01 
LIGHT GUIDE (STAND-BY) SERVICE
  6 
A-1843-072-A  REAR CASE ASSY B SERVICE (BLACK) 
(for BLACK, RED)
  6 
A-1843-073-A  REAR CASE ASSY W SERVICE (WHITE) (for WHITE)
  7 
4-295-881-01 
ENTER BUTTON B SERVICE (BLACK) 
(for BLACK, RED)
  7 
4-295-881-11 
ENTER BUTTON W SERVICE (WHITE) (for WHITE)
  8 
4-295-884-01 
4 DIRECTION BUTTON B SERVICE 
(b, v, B, V, MENU, BACK) (BLACK) (for BLACK, RED)
  8 
4-295-884-11 
4 DIRECTION BUTTON W SERVICE 
(b, v, B, V, MENU, BACK) (WHITE) (for WHITE)
  9 
9-913-402-43 
POLYIMIDE SHEET, t=0.075 (for SERVICE)
  10 
J-2501-274-A 
FIRAMENT TAPE (12 mm) (T0.18 mm) (for SERVICE)
  IR901 
A-1843-090-A  IR RECEIVER ASSY SERVICE
  J602 
4-141-818-01 
SERVICE DC JACK (DC IN 5V 
)
 LCD901 A-1843-068-A  LCD 
ASSY 
SERVICE
  LP901 
A-1843-091-A  LOGO PIPE ASSY SERVICE
 SP901  A-1843-089-A  SPEAKER 
ASSY 
SERVICE
Note
1. EXPLODED  VIEWS
Note1:
  Follow the disassembly procedure in the numerical order given.
3 two claws
3 two claws
3 two claws
4 Remove all claws while rounding in outer.
3 three claws
5
6 front case assy
– Rear bottom view –
– Front bottom view –
‡
 JIG
  When disassembling the set,
  use the following jig.
  Part No. 9-913-402-33 Tool for Disassembly
2 Insert the jig in the space between the front 
 
cover and the rear cover assy and remove.
1 two tapping screws
 (P2)
1 two tapping screws
 (P2)
Note: Please spread a sheet under a
 
unit not to injure front panel.
Note2:  Position where speaker assy (SP901) 
is installed.
Match the ditch of the speaker 
assy (SP901) to the rib of the 
rear case.
Note7:  The mount parts other than DC jack 
cannot exchange it alone. When the 
mount parts other than DC jack are 
defective, exchange the complete 
mounted board.
Note8:  When the MAIN board in this 
unit is replaced, it is necessary 
to set destination. Execute the 
setting of destination referring to 
“DESTINATION  SETTING” (page 6).
Note3:  How to install the MAIN board.
1 Insert two USB jacks 
 
in the rear case. 
MAIN board
2
Note4:  Position where logo pipe assy (LP901) 
is installed.
Match the ditch of the corner of the logo pipe 
assy (LP901) tothe rib of the rear case.
Note5:  Please cut out and use POLYIMIDE 
SHEET for a specified size when you 
exchange it for new parts.
 
As for this part, the material or thickness 
might be different compared with before.
 
However, there is no obstacle at all.
50 mm
20 mm
13 mm
Note6:  Please cut out and use FIRAMENT 
TAPE for a specified size when you 
exchange it for new parts.
 
As for this part, the material 
or thickness might be different 
compared with before.
 
However, there is no obstacle at all.
30 mm
12 mm
LCD901
LP901
(Note 4)
MAIN board
SP901
(Note 2)
IR901
J602
3
3
4
5
7
8
3
1
(Note 1)
6
(Note 1)
2
(Note 3, 7, 8)
9
(Note 5)
10
(Note 6)
DPF-HD700/HD800/HD1000
– 4 –
1-2. DPF-HD800
Ref. No. 
Part No. 
Description
Ref. No. 
Part No. 
Description
  51 
A-1843-076-A  FRONT CASE ASSY B SERVICE (BLACK)
  51 
A-1843-077-A  FRONT CASE ASSY W SERVICE (WHITE)
  52 
A-1843-074-A  MAIN BOARD, COMPLETE (for SERVICE)
  53 
3-080-205-21 
SCREW, TAPPING, P2 (SILVER) (for WHITE)
  53 
3-080-206-21 
SCREW, TAPPING, P2 (BLACK) (for BLACK)
 54 
4-295-882-01  VIEW 
BUTTON 
B SERVICE (VIEW MODE, 1) (BLACK)
  54 
4-295-882-11 
VIEW BUTTON W SERVICE (VIEW MODE, 1) (WHITE)
  55 
4-295-883-01 
LIGHT GUIDE (STAND-BY) SERVICE
  56 
A-1843-078-A  REAR CASE ASSY B SERVICE (BLACK)
  56 
A-1843-079-A  REAR CASE ASSY W SERVICE (WHITE)
  57 
4-295-881-01 
ENTER BUTTON B SERVICE (BLACK)
  57 
4-295-881-11 
ENTER BUTTON W SERVICE (WHITE)
  58 
4-295-884-01 
4 DIRECTION BUTTON B SERVICE 
(b, v, B, V, MENU, BACK) (BLACK)
  58 
4-295-884-11 
4 DIRECTION BUTTON W SERVICE 
(b, v, B, V, MENU, BACK) (WHITE)
  59 
9-913-402-43 
POLYIMIDE SHEET, t=0.075 (for SERVICE)
  60 
J-2501-274-A 
FIRAMENT TAPE (12 mm) (T0.18 mm) (for SERVICE)
  IR901 
A-1843-090-A  IR RECEIVER ASSY SERVICE
  J602 
4-141-818-01 
SERVICE DC JACK (DC IN 5V 
)
 LCD901 A-1843-075-A  LCD 
ASSY 
SERVICE
  LP901 
A-1843-091-A  LOGO PIPE ASSY SERVICE
 SP901  A-1843-089-A  SPEAKER 
ASSY 
SERVICE
Note
Note1:
  Follow the disassembly procedure in the numerical order given.
– Rear bottom view –
1 two tapping screws
 (P2)
1 two tapping screws
 (P2)
3 two claws
3 three claws
4 Remove all claws while rounding in outer.
3 three claws
3 three claws
5
6 front case assy
– Front bottom view –
‡
 JIG
  When disassembling the set,
  use the following jig.
  Part No. 9-913-402-33 Tool for Disassembly
2 Insert the jig in the space between the front 
 
cover and the rear cover assy and remove.
Note: Please spread a sheet under a
 
unit not to injure front panel.
Note2:  Position where speaker assy (SP901) 
is installed.
Match the ditch of the speaker 
assy (SP901) to the rib of the 
rear case.
Note7:  The mount parts other than DC jack 
cannot exchange it alone. When the 
mount parts other than DC jack are 
defective, exchange the complete 
mounted board.
Note3:  How to install the MAIN board.
1 Insert two USB jacks 
 
in the rear case. 
MAIN board
2
Note4:  Position where logo pipe assy (LP901) 
is installed.
Match the ditch of the corner of the logo pipe 
assy (LP901) tothe rib of the rear case.
Note5:  Please cut out and use POLYIMIDE 
SHEET for a specified size when you 
exchange it for new parts.
 
As for this part, the material or thickness 
might be different compared with before.
 
However, there is no obstacle at all.
50 mm
20 mm
13 mm
Note6:  Please cut out and use FIRAMENT 
TAPE for a specified size when you 
exchange it for new parts.
 
As for this part, the material 
or thickness might be different 
compared with before.
 
However, there is no obstacle at all.
30 mm
12 mm
LCD901
(Note 9)
MAIN board
IR901
J602
53
53
54
55
57
58
53
LP901
(Note 4)
SP901
(Note 2)
51
(Note 1
, 9
)
56
(Note 1
, 9
)
52
(Note 3, 7, 8
, 9
)
59
(Note 5)
60
(Note 6)
Note8:  When the MAIN board in this 
unit is replaced, it is necessary 
to set destination. Execute the 
setting of destination referring to 
“DESTINATION  SETTING” (page 6).
Ver. 1.1 2012.06
The changed portions from 
Ver. 1.0 are shown in blue.
Note9:  The LCD has been changed in the midway of production.
 
In connection with it, FRONT CASE ASSY, MAIN board and 
REAR CASE ASSY have been changed simultaneously.
 
Refer to service manual supplement-1 for details.
Page of 6
Display

Download Sony DPF-HD1000 / DPF-HD700 / DPF-HD800 Service Manual (Repair Manual)

Here you can read online and download Sony DPF-HD1000 / DPF-HD700 / DPF-HD800 Service Manual in PDF. DPF-HD1000 / DPF-HD700 / DPF-HD800 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DPF-HD1000 / DPF-HD700 / DPF-HD800 Other Service Manuals. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.