DPF-HD1000, DPF-HD700, DPF-HD800 - Sony Other Service Manuals Service Manual (repair manual). Page 2

DPF-HD700/HD800/HD1000

– 2 –

0 OR DOTTED LINE WITH 

0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST 

0 SUR LES 

LCD panel: 

DPF-HD1000: 25.7 cm/10.1-inches, TFT active matrix
DPF-HD800: 20 cm/8-inches, TFT active matrix
DPF-HD700: 18 cm/7-inches, TFT active matrix

Total number of dots: 

DPF-HD1000: 1,843,200 dots (1,024 × 3(RGB) × 600 dots)
DPF-HD800/HD700: 1,152,000 dots (800 × 3(RGB) × 480 dots)

20,000 hours (before brightness of the backlight is reduced to half)

USB connector (Type Mini-B, Hi-Speed USB)
USB connector (TypeA, Hi-Speed USB)  
“Memory Stick PRO” (Duo)/SD memory card slots

*1

JPEG: DCF 2.0, Exif 2.3, MPF baseline and MPF extended

 *2

, JFIF

TIFF: Exif 2.3 compatible
BMP: 1, 4, 8, 16, 24, 32 bit Windows format
RAW

 *3

: SRF, SR2, ARW 2.2 (preview only)

MPEG-4 AVC/H.264:

Extension: mp4, mts
Profile: Baseline Profile, Main Profile, High Profile
Level: lower than 4.2
Maximum resolution: 1920 × 1080
Audio format: Dolby Digital, AAC

MPEG-4 Visual:

Extension: mp4
Profile: Simple Profile, Advanced Simple Profile, Advanced Coding 

Efficiency Profile

Level: lower than 6 (Simple Profile), less than 5 (Advanced Simple 

Profile), less than 4 (Advanced Coding Efficiency Profile)

Maximum resolution: 1280 × 720
Audio format: AAC-LC

MPEG-1 Video:

Extension: mpg
Maximum resolution: 720 × 576
Audio format: MPEG-1 Audio Layer 2

Motion JPEG:

Extension: mov, avi 
Maximum resolution: 1280 × 768
Audio format: Linear PCM, μ-law, IMA-ADPCM

Maximum bit rate: 28 Mbps
Maximum frame rate: 60p
Background music

MP3: 

Extension: mp3
Bit rate: 32 kbps to 320 kbps, Supports variable bit rate (VBR)
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

AAC:

Extension: m4a
Bit rate: 32 kbps to 320 kbps, Supports variable bit rate (VBR)
Sampling frequency: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 

kHz, 32 kHz, 44.1 kHz, 48 kHz

Linear PCM:

Extension: wav
Sampling frequency: 44.1 kHz, 48 kHz

*7

16,384 × 12,288 (Progressive JPEG can be played up to 22,000,000 pixels.)

FAT12/16/32/exFAT

9,999 files for a memory card/an internal device

*8

2 GB (Approx. 4,000 images

*9

 can be saved.)

DC IN jack, DC 5V

DPF-HD1000

[With the AC adaptor]

At the maximum load: 11.3 W, normal mode: 6.3 W

[Without the AC adaptor]

At the maximum load: 8.5 W

DPF-HD800

[With the AC adaptor]

At the maximum load: 10.7 W, normal mode: 5.5 W

[Without the AC adaptor]

At the maximum load: 8.5 W

DPF-HD700

[With the AC adaptor]

At the maximum load: 10.1 W, normal mode: 5.0 W

[Without the AC adaptor]

At the maximum load: 8.0 W

*  The definition of the normal mode is a status which allows the performance 

of a slideshow using images stored in the internal memory with the default 
settings without inserting a memory card or connecting an external device.

5 °C to 35 °C (41 °F to 95 °F)

[With the stand spread out]

DPF-HD1000

Approx. 258 mm × 177.6 mm × 122.9 mm (10 
× 4 

th/height/depth)

DPF-HD800

Approx. 220 mm × 151.4 mm × 117.8 mm (8 
× 4 

th/height/depth)

DPF-HD700

Approx. 191 mm × 132.4 mm × 97.4 mm (7 
5 

th/height/depth)

DPF-HD1000: Appro
DPF-HD800: Approx. 490 g (1 lb 1 
DPF-HD700: Approx. 370 g (13 oz)
(excluding the AC adaptor, including the stand)

 100 V to 240 V, 50 Hz/60 Hz 0.4 A

 5 V, 2.2 A

Appro
(width/height/depth)(excluding the protruding parts)

Appro

See the label of AC adaptor for more details.

Design and specifications are subject to change without 
notice.

Manufactured under license from Dolby Laboratories.

*1: Some of the files may not be compatible depending on the type of data.
*2: Files cannot be displayed in 3D. Representative images are displayed in 2D.
*3: RAW files of a Sony α camera are displayed as thumbnail preview.
*4: Files with copyright protection cannot be played.
*5: Frames may be dropped during playback of a memory card due to the 

transfer rate of the memory card.

*6: Number of frames shown may be reduced during playback of some movie 

files.

*7: 17 × 17 or more are required. An image with an aspect ratio of 20:1 or more 

may not be displayed properly. Even if the aspect ratio is less than 20:1, 
display problem may occur in thumbnails, slideshow or other occasions.

*8: When measuring media capacity, 1 GB equals  1,000,000,000 bytes, a 

portion of which is used for data management and/or application files. The 
capacity that a user can use is approximately 1.8 GB.

*9: The number of stored images is an approximate guide when resizing and 

importing images.

 

When resizing and importing images, they are automatically resized to 
about 2,000,000 pixels. This varies depending on the subject and shooting 
conditions.

s 2emote control (1)
s 3tand (1)
s !C adaptor (1)
s /perating Instructions (1)
s #$ 2/-

, Cyber-shot, 

, “Memory Stick”, and 

 are trademarks or registered trademarks of Sony 

Corporation.
Microsoft, Windows, and Windows Vista are registered 
trademarks of Microsoft Corporation in the United 
States and/or other countries.
Macintosh and Mac OS are registered trademarks of 
Apple Inc.. in the United States and/or other countries. 
SD Logo, SDHC Logo, SDXC Logo are trademarks of 
SD-3C, LLC.
Contains iType

TM

 and fonts from Monotype Imaging 

Inc. 
iType

TM

 is a trademark of Monotype Imaging Inc.

Dolby is trademark of Dolby Laboratories.
MPEG Layer-3 audio coding technology and patents 
licensed from Fraunhofer IIS and Thomson.
All other companies and product names mentioned 
herein may be the trademarks or registered trademarks 
of their respective companies. Furthermore, “TM” and 
“

®

” are not mentioned in each case in this manual.

Boards requiring use of unleaded solder are printed with the leadfree 
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the 
lead free mark due to their particular size.)

Unleaded solder has the following characteristics.
•   Unleaded solder melts at a temperature about 40°C higher than ordi-

nary solder.
Ordinary soldering irons can be used but the iron tip has to be applied 
to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to about 
350°C.
Caution:  The printed pattern (copper foil) may peel away if the heated 
tip is applied for too long, so be careful!

•   Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than 
ordinary solder so use caution not to let solder bridges occur such as 
on IC pins, etc.

•   Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may also be 
added to ordinary solder.

After correcting the original service problem, perform the following 
safety checks before releasing the set to the customer.

1.  Check the area of your repair for unsoldered or poorly-soldered 

connections. Check the entire board surface for solder splashes and 
bridges.

2.  Check the interboard wiring to ensure that no wires are “pinched” 

or contact high-wattage resistors.

3.  Look for unauthorized replacement parts, particularly transistors, 

that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.

4.  Look for parts which, through functioning, show obvious signs of 

deterioration. Point them out to the customer and recommend their 
replacement.

5.  Check the B+ voltage to see it is at the values specified.
6.  Flexible Circuit Board Repairing
 

•   Keep the temperature of the soldering iron around 350°C during 

repairing.

 

•   Do not touch the soldering iron on the same conductor of the circuit 

board (within 3 times).

 

•   Be careful not to apply force on the conductor when soldering or 

unsoldering.

DPF-HD700

E (Except Middle East, Hong Kong, Korean and Chinese etc.)

z

z

z

Middle East and Hong Kong

z

z

z

DPF-HD800

US

z

AEP

z

z

East European

z

E (Except Middle East, Hong Kong, Korean and Chinese etc.)

z

Latin American

z

z

Middle East and Hong Kong

z

z

Brazillian

z

Taiwan

z

Korean

z

Australian

z

Chinese

z

z

DPF-HD1000

US

z

Canadian

z

AEP

z

East European

z

E (Except Middle East, Hong Kong, Korean and Chinese etc.)

z

Latin American

z

z

Middle East and Hong Kong

z

z

Taiwan

z

Korean

z

Australian

z

Chinese

z

z

Tourist

z