Read Sony DCR-DVD406E / DCR-DVD408 / DCR-DVD408E / DCR-DVD506E / DCR-DVD508 / DCR-DVD508E / DCR-DVD808 / DCR-DVD808E / DCR-DVD908 / DCR-DVD908E (serv.man5) Service Manual online
SECTION 6
ADJUSTMENTS
Revision History
Revision History
Sony EMCS Co.
Auto-ADJ
Ver. 1.6 2008.04
9-852-179-53
2008D0500-1
© 2008.4
Published by Kohda TEC
• Use this Service Manual together with the Automatic Adjustment Program (DCR-DVD408 Series Auto-Adj
Ver_1.6r06.exe) and the AUDIT (Drive Adjustment Program).
RMT-835
Link
Link
LCD/EVF SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
USB SERIAL No. INPUT
DESTINATION DATA WRITE
ADJUSTMENT PROGRAM
AUDIO SYSTEM ADJUSTMENTS
ERROR
POWER ADJUSTMENT
DIAGNOSIS
TROUBLESHOOTING
SERVO ADJUSTMENT
AUDIT (Drive Adjustment Program)
PREPARATIONS BEFORE ADJUSTMENTS
DRIVE SECTION ADJUSTMENTS
APPLICATION FOR ADJUSTMENT (SeusEX)
SERVICE MODE
DATA BACKUP
SERVICE MODE
Adjusting items when replacing main parts and boards
List of service tools
Before starting adjustments
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/
DVD508E/DVD808/DVD808E/DVD908/DVD908E
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ
— 2 —
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF
MORE THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF
MORE THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
hazard.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
Optical sensor disc (J-6082-570-A)
CAUTION
In the process of adjusting optical power,
CLASS1M laser optical radiates. so do not
remove this sensor disk.
CLASS1M laser optical radiates. so do not
remove this sensor disk.
— 3 —
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ
TABLE OF CONTENTS
6.
ADJUSTMENTS
Before Starting Adjustments ····················································· 6-1
1-1.
1-1.
Adjusting Items when Replacing Main Parts and
Boards ·············································································· 6-1
Boards ·············································································· 6-1
1-2.
List of Service Tools ························································ 6-3
6-1.
Camera Section Adjustments ··········································· 6-5
1-1.
Preparations before Adjustments
(CAMERA Section) ························································ 6-5
(CAMERA Section) ························································ 6-5
1-2.
Adjustment Program ························································ 6-8
1-3.
Destination Data Write ·················································· 6-10
1-4.
USB Serial No. Input ····················································· 6-12
1-5.
Video System Adjustments ············································ 6-13
1-6.
Camera System Adjustments ········································· 6-16
1-7.
LCD/EVF System Adjustments ····································· 6-29
1-8.
Audio System Adjustments ··········································· 6-32
1-9.
Error ··············································································· 6-34
6-2.
Drive Section Adjustments ············································ 6-36
2-1.
Preparations before Adjustments (Drive Section) ········· 6-36
2-2.
AUDIT (Drive Adjustment Program) ···························· 6-39
2-3.
Diagnosis ······································································· 6-41
2-4.
Power Adjustment ························································· 6-44
2-5.
Servo Adjustment ·························································· 6-45
2-6.
Troubleshooting ····························································· 6-47
6-3.
Service Mode ································································· 6-52
3-1.
Application for Adjustment (SeusEX) ·························· 6-52
3-2.
Service Mode ································································· 6-53
3-3.
Data Backup ·································································· 6-57
Section
Title
Page
*
The camera color reproduction frame is shown on page
6-58 to 6-61.
Ver. 1.5 2008.03
6-1
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ
6. ADJUSTMENTS
Table 6-1-1 (1)
1-1. Adjusting items when replacing main parts and boards
•
Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note 1:
The Automatic Adjustment Program does not support.
Note 2:
DCR-DVD406E/DVD408/DVD408E/DVD808/DVD808E only
Note 3:
DCR-DVD506E/DVD508/DVD508E/DVD908/DVD908E only
Before starting adjustments
Lens device
Drive block
LCD block LCD901 (LCD panel)
EVF block LCD902 (LCD panel)
FL25200 block Strobe flash unit
Microphone unit MIC901
CM-076 board IC6901 (CMOS imager) (Note 2)
CM-076 board SE8201, 8202 (YAW, PITCH sensor) (Note 2)
CM-077 board IC6701 (CMOS imager) (Note 3)
CM-077 board SE7201, 7202 (YAW, PITCH sensor) (Note 3)
VC-478 board IC1201 (CDS, A/D conv.)
VC-478 board IC1301 (CDS, A/D conv.) (Note 3)
VC-478 board IC1701, X1701 (Clock generator)
VC-478 board IC2901 (D/A conv.)
VC-478 board IC3301 (Video, Audio I/O)
VC-478 board IC3702 (EVF drive)
BL-004 board D5901 (EVF backlight)
MD-134 board IC4101 (RF process)
MD-134 board IC4201 (DVD DSP)
MD-134 board IC4401 (DVD mecha drive)
PD-324 board IC6102 (LCD drive)
PD-324 board D6106-6108 (LCD backlight)
Destination
Data Write
Data Write
Destination data write
USB Serial No.
Input
Input
USB serial No. input
(Note 1)
Origin oscillation check
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
VIDEO OUT level check
Initialization of
EEPROM Data
EEPROM Data
Initialization of EEPROM Data
STEADY HALL adj. (Note 3)
HALL adj.
MR adj.
Differential gain adj.
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
z
F No. & ND light qualiy
standard data input
Mechanical shutter adj
Linear matrix adj.
standard data input
Mechanical shutter adj
Linear matrix adj.
AWB standard data input
LV standard data input
AWB adj.
Color reproduction adj.
MAX GAIN adj.
White defect adj.
Black defect adj.
Strobe light level adj.
Black defect adj.
Strobe light level adj.
Strobe white balance adj.
CAMERA
adjustment 7
adjustment 7
Steady shot check (Note 2)
z
CAMERA
adjustment 8
adjustment 8
GYRO sensor sensitivity adj. (Note 3)
z
z
LCD/EVF automatic adj.
V-COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Sample hold phase adj.
LCD/EVF automatic adj.
Sample hold phase adj.
LCD/EVF automatic adj.
White balance adj.
AUDIO
adjustment
adjustment
Internal 3ch microphone sensitivity adj.
z
z
POWER adj.
z
z
z
z
SERVO adj.
z
z
z
z
z
z
z
z
z
z
z
LCD
adjustment
adjustment
EVF
adjustment
adjustment
z
z
z
z
z
AUDIT
Touch panel
adjustment
adjustment
z
z
z
z
z
Adjustment
Touch panel adj.
Adjusting item
z
CAMERA
adjustment 4
adjustment 4
z
CAMERA
adjustment 1
adjustment 1
Replaceed parts
CAMERA
adjustment 6
adjustment 6
z
CAMERA
adjustment 5
adjustment 5
VIDEO
adjustment
adjustment
z
z
z
Parts replacement
Block replacement
z
z
Ver. 1.1 2007.03
