Read Sony DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E Service Manual online
— 18 —
Fig. 4-5
4-5. Blind Plate, Lock Guide
1. Removal procedure
1)
Remove the diode D001 (tape LED) 1 from the notch of the
plate 4.
plate 4.
2)
Remove the flexible wiring board 2 (FP-301) from T-shaped
portion of the blind plate 4 in the direction of the arrow A.
portion of the blind plate 4 in the direction of the arrow A.
3)
Remove the screw (camera pan2 main M1.4
×
1.6) 3.
4)
Release the hook on the notches G, D, E and F of the blind
plate 4 in the direction of the arrow B.
plate 4 in the direction of the arrow B.
5)
Remove the reel release lever 5 in the direction of the arrow
C
C
.
2. Attachment procedure
1)
Attach the reel release lever 5 to the blind plate 4.
2)
Hang the notches G, D, E and F of the blind plate 4 on
the hook.
the hook.
3)
Attach the screw (camera pan2 main M1.4
×
1.6) 3.
Tightening torque: 0.078
±
0.01 N•m (0.8
±
0.1 kgf•cm)
4)
Attach the flexible wiring board (FP-301) 2 to the T-shaped
portion of the blind plate 4.
portion of the blind plate 4.
5)
Attach the diode (tape LED) 1 to the notch of the blind plate
4
4
.
3
Screw
(camera pan 2 main M1.4
×
1.6)
1
D001
Diode (tape LED)
4
Remove the blind plate in the
direction of the arrow B.
5
Remove the reel release
lever in the direction of
the arrow C.
the arrow C.
B
A
C
Notch D
Notch E
Notch G
Notch F
2
Remove the FP-301 flexible
board in the direction of
the arrow A.
the arrow A.
Claw
Click on the first or last page to see other DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E service manuals if exist.