Read Sony DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E Service Manual online
— 21 —
4-8. R Drive Gear Assembly, LS Cam Plate (LS type A)
Note: In the M2000 mechanism, the LS chassis assembly is installed in
the two different methods: They are type-A and type-B. Identify
which method of either type-A or type-B is used by referring to the
description on page 3.
which method of either type-A or type-B is used by referring to the
description on page 3.
2. Attachment procedure
1)
Attach the R drive gear assembly 2 with the lumiler cut washer
(0.98
(0.98
×
3
×
0.13) 1.
2)
When installing the LS cam plate, align the LS cam plate 5
with the two dowels of the LS chassis block assembly, and fix
the LS cam plate 5 with the two screws (precision type3 M1.7)
4
with the two dowels of the LS chassis block assembly, and fix
the LS cam plate 5 with the two screws (precision type3 M1.7)
4
.
Note: When the head diameter is 3 mm, replace it with the head
diameter of 4 mm.
3)
Adjust the position of the LS cam plate (Refer to 4-9.)
4)
Attach the blind plate with a single screw. (camera pan2 main
M1.4
M1.4
×
1.6) (Refer to 4-5.)
Fig. 4-8
1
Lumiler (W)
cut (0.98
×
3
×
0.13)
2
R drive gear
assembly
Do not bend the claw.
LS chassis
assembly
assembly
When attaching it, coat the hatched
portion with grease.
portion with grease.
When attaching it, coat the hatched
portion with grease.
portion with grease.
4
Two screws
(M1.7)
When the head diameter is 3 mm,
replace it with the head diameter of 4 mm
replace it with the head diameter of 4 mm
(3-071-650-01).
5
LS cam plate
Note 1:
The HLC cut (1.8 x 4 x 0.5) is not provided
for some units. It is not necessary for
reassembling.
The HLC cut (1.8 x 4 x 0.5) is not provided
for some units. It is not necessary for
reassembling.
3
HLC cut (1.8
×
4
×
0.5)
Two dowels
1. Removal procedure
1)
Remove the blind plate. (Refer to 4-5.)
2)
Remove the lumiler cut washer (0.98
×
3
×
0.13) 1.
3)
Remove the R drive gear assembly 2.
4)
Remove the HLC Cut (1.8
×
4
×
0.5) 3 and the two screws
(M1.7) 4.
Note: Some machines do not use the HLC cut (1.8
×
4
×
0.5).
5)
Remove the LS cam plate 5.
Click on the first or last page to see other DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E service manuals if exist.