Read Sony DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) Service Manual online
6-31
DCR-SR30E/SR40/SR40E_ADJ
6) After setting the picture frame, if the
[End]
button is clicked,
“4. Color Reproduction Adj.” is executed. The following mes-
sage is displayed, and then adjust the burst position of the
vectorscope.
sage is displayed, and then adjust the burst position of the
vectorscope.
7) If the
[OK]
button is clicked, the following message is dis-
played, and then adjust the luminance point of each color us-
ing the
ing the
[Up]
/
[Down]
button on the screen. After the adjust-
ment finished, click the
[End]
button.
Fig. 6-1-13
8) After the adjustment, if the
[End]
button is clicked, the fol-
lowing messages are displayed in the order given below. Then,
change the chart in accordance with the message.
change the chart in accordance with the message.
9) After the setting, if the
[OK]
button is clicked, the adjustment
items “5. AWB Standard Data Input” and “6. LV Standard Data
Input” are executed.
Input” are executed.
10) Upon successful completion of the “6. LV Standard Data In-
put”, the following message is displayed during the execution
of “7. AWB Adj.”. During the execution, the following mes-
sages are displayed in the order given below. Place or remove
the filters on the lens in accordance with the messages.
of “7. AWB Adj.”. During the execution, the following mes-
sages are displayed in the order given below. Place or remove
the filters on the lens in accordance with the messages.
Burst position
R-Y
B-Y
R
B
G
M
G
Y
E
C
Y
Burst position
R-Y
B-Y
R
B
G
M
G
Y
E
C
Y
Click on the first or last page to see other DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) service manuals if exist.