DCR-SR30E, DCR-SR40, DCR-SR40E (serv.man4) - Sony Movie Service Manual (repair manual). Page 32

6-30

DCR-SR30E/SR40/SR40E_ADJ

[Automatic Adjustment Program execution items and sequence]
1. Data Setting during Camera Adj.
2. F No. Standard Data Input
3. Picture Frame Setting (Color Reproduction Adjustment Frame)
4. Color Reproduction Adj.
5. AWB Standard Data Input
6. LV Standard Data Input
7. AWB Adj.
8. AWB Check
9. Picture Frame Setting (Center Frame)
10. MAX GAIN Adj.
11. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Select the model (NTSC Model or PAL Model) with the Model

Select radio button.

NTSC model: DCR-SR40
PAL model: DCR-SR30E/SR40E

2) Click the 

[Start]

 button of the CAMERA Adjustment 4.

3) The Automatic Adjustment Program executes the items from

“1. Data Setting during Camera Adj.” to “2. F No. Standard
Data Input.”.

4) Upon successful completion of the “2. F No. Standard Data

Input.”, the following message is displayed during the execu-
tion of “3. Picture Frame Setting (Color Reproduction Adjust-
ment Frame)”. Set the subject in accordance with the mes-
sage.

5) If the 

[OK]

 button is clicked, the following screen will appear,

and then adjust the zoom and the camera direction to set the
picture frame. After the setting finished, click the 

[End]

 but-

ton.

The buttons on this screen provide the following functions:

[Save the position]

 button

Saves the camera zoom and focus position data.

[Load the position]

 button

Reads the camera zoom and focus position data saved last and
moves the camera zoom and focus to that position.

The zoom and focus position data are saved with
“DCR_SR40_ZoomFocusData.txt” file name in the same
holder as the Automatic Adjustment Program.
No position data can be read if this file is moved or de-
leted.

Only the latest position data can be saved. If the

[Save the position]

 button is clicked, the latest data are

saved overwriting the previous data.