DCR-SR30E, DCR-SR40, DCR-SR40E (serv.man4) - Sony Movie Service Manual (repair manual)

dcr-sr30e, dcr-sr40, dcr-sr40e (serv.man4) service manual
Model
DCR-SR30E DCR-SR40 DCR-SR40E (serv.man4)
Pages
54
Size
662.66 KB
Type
PDF
Document
Service Manual
Brand
Device
Movie / SECTION 6 ADJUSTMENTS
File
dcr-sr30e-dcr-sr40-dcr-sr40e-sm4.pdf
Date

Read Sony DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) Service Manual online

SECTION 6
ADJUSTMENTS
Revision History
Revision History
Link
Link
Sony EMCS Co.
Auto-ADJ
Adjusting items when replacing main parts and boards
List of service tools
Before starting adjustments
LCD SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
ADJUSTMENT PROGRAM
HDD SYSTEM ADJUSTMENTS
AUDIO SYSTEM ADJUSTMENTS 
ERROR
INITIALIZATION OF 9, A, B, C, D, E, F, 13, 15, 
17, 19, 1A, 1B, 1C, 1E, 1F PAGE DATA
INITIALIZATION OF INFORMATION DATA
ADJUSTMENT REMOTE COMMANDER
(NEW LANC JIG)
ADJUSTMENT REMOTE COMMANDER (RM-95)
APPLICATION FOR ADJUSTMENT (SeusCam)
SERVICE MODE
DATA PROCESS
SERVICE MODE
DCR-SR30E/SR40/SR40E_ADJ
2006H0500-1
  © 2006.8
Published by Kohda TEC
9-852-139-51
• Use this Service Manual together with the Automatic Adjustment Program (DCR-SR40 Series Auto-Adj Ver1.
[]
r
[][]
.exe).
Note:
[]
 (numeric value) of the file name varies depending on the version of Automatic Adjustment Program.
• Precaution on Replacing the VC-466 Board
Ver 1.0  2006.08
DCR-SR30E/SR40/SR40E
— 2 —
DCR-SR30E/SR40/SR40E_ADJ
TABLE OF CONTENTS
6.
ADJUSTMENTS
Before Starting Adjustments ····················································· 6-1
1-1.
Adjusting Items when Replacing Main Parts and
Boards ·············································································· 6-3
1-2.
List of Service Tools ························································ 6-5
6-1.
Camera Section Adjustments ··········································· 6-6
1-1.
Preparations before Adjustments
(CAMERA Section) ························································ 6-6
1-2.
Initialization of 9, A, B, C, D, E, F, 13, 15, 17, 19,
1A, 1B, 1C, 1E, 1F Page Data ········································· 6-8
1-3.
Adjustment Program ······················································ 6-18
1-4.
HDD System Adjustments ············································· 6-19
1-5.
Initialization of Information Data ·································· 6-20
1-6.
Video System Adjustments ············································ 6-21
1-7.
Camera System Adjustments ········································· 6-24
1-8.
LCD System Adjustments ············································· 6-34
1-9.
Audio System Adjustments ··········································· 6-37
1-10. Error ··············································································· 6-39
6-2.
Service Mode ································································· 6-41
2-1.
Adjustment Remote Commander (RM-95) ··················· 6-41
2-2.
Adjustment Remote Commander (New LANC Jig) ····· 6-42
2-3.
Application for Adjustment (SeusCam) ························ 6-43
2-4.
Data Process ·································································· 6-44
2-5.
Service Mode ································································· 6-45
Section
Title
Page
*
The camera color reproduction frame is shown on page
6-52.
6-1
DCR-SR30E/SR40/SR40E_ADJ
SECTION 6
ADJUSTMENTS
1.
Before starting adjustments
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced.  Download the saved data after a
board is replaced.
Remove the EEPROM and install it.
(Former board)
(New board)
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired.  Install the removed
EEPROM to the replaced board.
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-4 for the items to be checked)
(Machine before starting repair)
(Machine after a board is replaced)
PC
PC
Save the EVR data 
to a personal computer.
Download the saved 
data to a machine.
(Machine to be repaired)
(Machine to be repaired)
(The same model of the same destination)
Save the data.
Download the data.
PC
6-2
DCR-SR30E/SR40/SR40E_ADJ
Precaution on Replacing the VC-466 Board
• Perform “Exif Model Data Check” mentioned below, and also the adjustment items necessary after VC Board re-
placement.
Exif Model Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting.
When the data has changed because of board replacing etc., check the data setting (Exif Model Data) is right. If not,
rewrite to the right value.
Exif Model Data
Writing Method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: B6 to B8, and set the Exif Model Data.
Note:
To write in the non-volatile memory (EEPROM), press the PAUSE (Write) button each time to set the data.
3) Select page: 0, address: 01, and set data: 00.
Address
B6
B7
B8
Page
A
A
A
Data
DCR-SR40
34
30
00
DCR-SR30E
33
30
45
DCR-SR40E
34
30
45
Page of 54

Download Sony DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) Service Manual (Repair Manual)

Here you can read online and download Sony DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) Service Manual in PDF. DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) Movie. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.