Read Sony DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) Service Manual online
6-11
DCR-SR30E/SR40/SR40E_ADJ
6.
D Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
10 to 13
Fixed data-1 (Initialized data)
14
Fixed data-2
15
Fixed data-1 (Initialized data)
16
17
Fixed data-2
18 to 27
Fixed data-1 (Initialized data)
28
29
2A
2B
2C
Fixed data-2
2D
2E
2F
30
31, 32
Fixed data-1 (Initialized data)
33
Fixed data-2
34 to 48
Fixed data-1 (Initialized data)
49
Fixed data-2
4A
Fixed data-1 (Initialized data)
4B
Fixed data-2
4C, 4D
Fixed data-1 (Initialized data)
4E
Fixed data-2
4F to 56
Fixed data-1 (Initialized data)
57
Fixed data-2
58 to 7F
Fixed data-1 (Initialized data)
10. 1A Page table
Note 1:
Note 1:
If reading/writing data on pages 1A, set data: 01 to page:
0, address: 10, and then select pages: A. By this data set-
ting, the pages 1A can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: A. By this data set-
ting, the pages 1A can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
11. 1B Page table
Note 1:
Note 1:
If reading/writing data on pages 1B, set data: 01 to page:
0, address: 10, and then select pages: B. By this data set-
ting, the pages 1B can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: B. By this data set-
ting, the pages 1B can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
7.
13 Page table
Note 1:
If reading/writing data on pages 13, set data: 01 to page:
0, address: 10, and then select pages: 3. By this data set-
ting, the pages 13 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 3. By this data set-
ting, the pages 13 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
8.
15 Page table
Note 1:
If reading/writing data on pages 15, set data: 01 to page:
0, address: 10, and then select pages: 5. By this data set-
ting, the pages 15 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 5. By this data set-
ting, the pages 15 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
9.
17 Page table
Note 1:
If reading/writing data on pages 17, set data: 01 to page:
0, address: 10, and then select pages: 7. By this data set-
ting, the pages 17 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 7. By this data set-
ting, the pages 17 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
Click on the first or last page to see other DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) service manuals if exist.