Read Sony DCR-PC110 / DCR-PC110E (serv.man4) Service Manual online
5-22
11. Auto White Balance & LV Standard Data Input
Adjust the white balance reference at 3200K, and adjust the normal
coefficient of the light value.
coefficient of the light value.
Subject
Clear chart
(Color reproduction adjustment
frame)
(Color reproduction adjustment
frame)
Measurement Point
Display data of page 1 (Note4)
Measuring Instrument
Adjustment remote commander
Adjustment Page
F
Adjustment Address
1E, 1F, 30 to 33
Specified Value
0FF0 to 1010
Note1:
This adjustment should be carried out upon completion of “ Color
reproduction Adjustment”.
reproduction Adjustment”.
Note2:
After the power is turned on, this adjustment can be done only
once.
once.
Note3:
Check that the data of page: 6, address: 02 is “00”. If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
6, address: 01, set data: 00, and press the PAUSE button.
Note4:
Displayed data of page 1 of the adjustment remote commander.
1 : XX : XX
Display data
Switch setting:
1)
1)
POWER .................................................................. CAMERA
2)
NIGHT SHOT .................................................................. OFF
3)
DIGITAL ZOOM ............................................................. OFF
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
6
01
11
Set the data, and press PAUSE
button.
button.
3
6
01
0D
Set the data, and press PAUSE
button.
button.
4
6
02
Check that the data changes to
“01”. (Note5)
“01”. (Note5)
5
F
10
2E
Set the data, and press PAUSE
button.
button.
6
1
Check that the display data
(Note4) satisfies the specified
value.
(Note4) satisfies the specified
value.
Note5:
The adjustment data will be automatically input to page: F, address:
1E, 1F, 30 to 33.
1E, 1F, 30 to 33.
Processing after Completing Adjustments
Order Page Address Data
Procedure
1
6
01
00
Set the data, and press PAUSE
button.
button.
2
F
10
00
Set the data, and press PAUSE
button.
button.
3
0
01
00
Set the data.
4
Perform “Auto White Balance
Adjustment”.
Adjustment”.
10. MAX GAIN Adjustment
Setting the minimum illumination.
If it is not consistent, the image level required for taking subjects in
low illuminance will not be produced (dark).
If it is not consistent, the image level required for taking subjects in
low illuminance will not be produced (dark).
Subject
Clear chart
(Color reproduction adjustment
frame)
(Color reproduction adjustment
frame)
Adjustment Page
F
Adjustment Address
1D
Switch setting:
1)
1)
POWER .................................................................. CAMERA
2)
NIGHT SHOT .................................................................. OFF
3)
STEADY SHOT (Menu display) ..................................... OFF
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
6
96
00
Set the data.
3
6
97
Set the following data.
18: DCR-PC110 (NTSC)
0C: DCR-PC110E (PAL)
0C: DCR-PC110E (PAL)
4
6
01
6F
Set the data, and press PAUSE
button.
button.
5
6
02
Check that the data changes to
“01”. (Note)
“01”. (Note)
Note:
The adjustment data will be automatically input to page: F, address:
1D
1D
Processing after Completing Adjustments
Order Page Address Data
Procedure
1
6
96
00
Set the data.
2
6
97
00
Set the data.
3
6
01
00
Set the data, and press PAUSE
button.
button.
4
0
01
00
Set the data.
