Read Sony DCR-PC110 / DCR-PC110E (serv.man2) Service Manual online
SERVICE MANUAL
SERVICE MANUAL
DIGITAL VIDEO CAMERA RECORDER
Level 3
The information that is not described in this
Service Manual is described in the LEVEL 2
Service Manual.
When repairing, use this manual together with
LEVEL 2 Service Manual.
Service Manual is described in the LEVEL 2
Service Manual.
When repairing, use this manual together with
LEVEL 2 Service Manual.
Contents of LEVEL 2 Service Manual
SERVICE NOTE
1. GENERAL
2. DISASSEMBLY
1. GENERAL
2. DISASSEMBLY
3. BLOCK DIAGRAMS
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
5. ADJUSTMENTS
6. REPAIR PARTS LIST
OVERALL
POWER
CD-285 BOARD
CONTROL SWITCH BLOCK (MF-30550)
AI-021 BOARD
CONTROL SWITCH BLOCK (FK-30550)
CONTROL SWITCH BLOCK (ME-30550)
CONTROL SWITCH BLOCK (PS-30550)
FP-256 BOARD
FLASH UNIT (30550MC/30550ST)
PD-134 BOARD
VF-147 BOARD
FJ-027 BOARD
FP-251 BOARD
FP-100, FP-228, FP-102 FLEXIBLE BOARD
POWER
CD-285 BOARD
CONTROL SWITCH BLOCK (MF-30550)
AI-021 BOARD
CONTROL SWITCH BLOCK (FK-30550)
CONTROL SWITCH BLOCK (ME-30550)
CONTROL SWITCH BLOCK (PS-30550)
FP-256 BOARD
FLASH UNIT (30550MC/30550ST)
PD-134 BOARD
VF-147 BOARD
FJ-027 BOARD
FP-251 BOARD
FP-100, FP-228, FP-102 FLEXIBLE BOARD
EXPLODED VIEWS
ELECTRICAL PARTS LIST
ELECTRICAL PARTS LIST
SERVICE MANUAL
US Model
Canadian Model
Korea Model
DCR-PC110
AEP Model
UK Model
Australian Model
Chinese Model
DCR-PC110E
E Model
Hong Kong Model
Tourist Model
DCR-PC110/PC110E
J MECHANISM
Photo : DCR-PC110
RMT-811
DCR-PC110/PC110E
RMT-811
Ver 1.2 2001. 10
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
TABLE OF CONTENTS
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
4-2.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS ·········································· 4-11
SCHEMATIC DIAGRAMS ·········································· 4-11
• VC-253 (CAMERA, REC/PB HEAD AMP,
HI CONTROL, MECHA CONTROL, SERVO,
MS INTERFACE, Y/C PROCESSOR, DC-DC
CONVERTER)
MS INTERFACE, Y/C PROCESSOR, DC-DC
CONVERTER)
PRINTED WIRING BOARD ······················· 4-11
• VC-253 (A/D CONVERTER)(1/19)
SCHEMATIC DIAGRAM ···························· 4-15
• VC-253 (CAMERA SIGNAL PROCESSOR)(2/19)
SCHEMATIC DIAGRAM ···························· 4-17
• VC-253 (CAMERA SIGNAL PROCESSOR)(3/19)
SCHEMATIC DIAGRAM ···························· 4-19
• VC-253 (DIGITAL STILL PROCESS)(4/19)
SCHEMATIC DIAGRAM ···························· 4-21
• VC-253 (DV PROCESSOR)(5/19)
SCHEMATIC DIAGRAM ···························· 4-23
• VC-253 (LIP/VIDEO BUFFER)(6/19)
SCHEMATIC DIAGRAM ···························· 4-25
• VC-253 (REC/PB HEAD AMP)(7/19)
SCHEMATIC DIAGRAM ···························· 4-27
• VC-253 (A/D CONVERTER)(8/19)
SCHEMATIC DIAGRAM ···························· 4-29
• VC-253 (CAMERA CONTROL)(9/19)
SCHEMATIC DIAGRAM ···························· 4-31
• VC-253 (FOCUS/ZOOM MOTOR CONTROL)(10/19)
SCHEMATIC DIAGRAM ···························· 4-33
• VC-253 (HI CONTROL)(11/19)
SCHEMATIC DIAGRAM ···························· 4-35
• VC-253 (MECHANISM CONTROL)(12/19)
SCHEMATIC DIAGRAM ···························· 4-37
• VC-253 (DRUM/CAPSTAN MOTOR DRIVE)(13/19)
SCHEMATIC DIAGRAM ···························· 4-39
• VC-253 (JPEG)(14/19)
SCHEMATIC DIAGRAM ···························· 4-41
• VC-253 (DIGITAL STILL CONTROL)(15/19)
SCHEMATIC DIAGRAM ···························· 4-43
• VC-253 (16MBIT SDRAM/4MBIT FLASH RAM)(16/19)
SCHEMATIC DIAGRAM ···························· 4-45
• VC-253 (IR)(17/19)
SCHEMATIC DIAGRAM ···························· 4-47
• VC-253 (CONNECTOR)(18/19)
SCHEMATIC DIAGRAM ···························· 4-49
• VC-253 (DC/DC CONVERTER)(19/19)
SCHEMATIC DIAGRAM ···························· 4-51
4-3.
WAVEFORMS ······························································ 4-89
4-4.
MOUNTED PARTS LOCATION ································· 4-90
6.
REPAIR PARTS LIST
6-2.
ELECTRICAL PARTS LIST ········································ 6-16
DCR-PC110/PC110E
DCR-PC110/PC110E
SECTION 4
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
DCR-PC110/PC110E
4-12
CAMERA, REC/PB HEAD AMP, HI CONTROL, MECHA CONTROL, SERVO, MS INTERFACE, Y/C PROCESSOR, DC-DC CONVERTER
VC-253
VC-253 (CAMERA, REC/PB HEAD AMP, HI CONTROL, MECHA CONTROL, SERVO, MS INTERFACE, Y/C PROCESSOR, DC-DC CONVERTER)
PRINTED WIRING BOARD
— Ref. No. VC-253 Board; 10,000 Series —
4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
CD-285 (CCD IMAGER)
VC-253
FLASH UNIT (MC)
CAMERA, REC/PB HEAD AMP, HI CONTROL,
MECHA CONTROL, SERVO, MS INTERFACE,
DC-DC CONVERTER, Y/C PROCESSOR
MECHA CONTROL, SERVO, MS INTERFACE,
DC-DC CONVERTER, Y/C PROCESSOR
For printed wiring board
• Refer to pages 4-90, 91 for parts location.
• VC-253 board consists of multiple layers. However, only
• Refer to pages 4-90, 91 for parts location.
• VC-253 board consists of multiple layers. However, only
the sides (layers) A and B are shown.
• Chip parts
Transistor
Diode
There are few cases that the part printed on this
diagram isn’t mounted in this model.
diagram isn’t mounted in this model.
C
B
E
3
2
1
