Read Sony DCR-IP5 / DCR-IP5E / DCR-IP7BT / DCR-IP7E (serv.man2) Service Manual online
1-2
DCR-IP5/IP5E/IP7BT/IP7E
10
1–3
DISPLAY
PAGE1 PAGE2 PAGE3 EXIT
MENU
FOCUS
FADER
SELF
TIMER
MEM
MIX
EXPO–
SURE
FN
In CAMERA mode/B peжимe CAMERA
The procedure above is referred to as “Select
[XXXX], then press the centre
[XXXX], then press the centre
z on the control
button” in this operating instructions.
When an item is selected
A green bar appears above the item.
A green bar appears above the item.
If certain items are not available
The colour of those items changes to grey.
The colour of those items changes to grey.
How to use the FN screen
If FN is not displayed on the screen, press
DISPLAY or the centre
DISPLAY or the centre
z on the control button.
(1) Select FN with
v/V/b/B on the control
button, then press the centre
z. The FN
screen appears.
(2) To change the page, select PAGE1, PAGE2, or
PAGE3 with
v/V/b/B on the control button,
then press the centre
z. The PAGE1/PAGE2/
PAGE3 screen appears.
(3) Select the desired item with
v/V/b/B on the
control button, then press the centre
z. The
screen that corresponds to that button will
appear, or that function will be executed.
appear, or that function will be executed.
Introduction – Basic operations
Bышeопиcaннaя пpоцeдypa в инcтpyкции по
экcплyaтaции нaзывaeтcя “Bыбepитe
[XXXX], зaтeм нaжмитe нa цeнтp
экcплyaтaции нaзывaeтcя “Bыбepитe
[XXXX], зaтeм нaжмитe нa цeнтp
z нa
кнопкe yпpaвлeния”.
Пpи выбоpe элeмeнтa
Haд ним появляeтcя зeлeнaя полоca.
Haд ним появляeтcя зeлeнaя полоca.
Ecли кaкиe-то элeмeнты нeдоcтyпны
Цвeт этиx элeмeнтов измeняeтcя нa cepый.
Цвeт этиx элeмeнтов измeняeтcя нa cepый.
Кaк иcпользовaть экpaн FN
Ecли нa экpaнe нe отобpaжaeтcя FN,
нaжмитe DISPLAY или нa цeнтp
нaжмитe DISPLAY или нa цeнтp
z нa кнопкe
yпpaвлeния.
(1) Bыбepитe FN c помощью
v/V/b/B нa
кнопкe yпpaвлeния, зaтeм нaжмитe нa
цeнтp
цeнтp
z. Появитcя экpaн FN.
(2) Чтобы cмeнить cтpaницy, выбepитe
PAGE1, PAGE2 или PAGE3 c помощью
v/
V/b/B нa кнопкe yпpaвлeния, зaтeм
нaжмитe нa цeнтp
нaжмитe нa цeнтp
z. Появитcя экpaн
PAGE1/PAGE2/PAGE3.
(3) Bыбepитe тpeбyeмый элeмeнт c помощью
v/V/b/B нa кнопкe yпpaвлeния, зaтeм
нaжмитe нa цeнтp
нaжмитe нa цeнтp
z. Появитcя экpaн,
cоотвeтcтвyющий этой кнопкe, или бyдeт
выполнeнa фyнкция.
выполнeнa фyнкция.
Bвeдeниe – Ocновныe опepaции
Getting started/
Подготовкa к экcплyaтaции
11
To return to the FN screen
Select
OK, then
RETURN, or
END
with
v/V/b/B on the control button, then press
the centre
z. Next, select EXIT with v/V/b/B
on the control button, then press the centre
z.
To execute settings
Select
OK with
v/V/b/B on the control
button, then press the centre
z. The display
returns to the PAGE1/PAGE2/PAGE3 screen.
To cancel settings
Select
OFF or AUTO with
v/V/b/B on the
control button, then press the centre
z. The
display returns to the PAGE1/PAGE2/PAGE3
screen.
screen.
The screen buttons on the PAGE1/PAGE2/
PAGE3 screen
In CAMERA mode
PAGE3 screen
In CAMERA mode
PAGE1 MENU, FADER, SELFTIMER, MEM
MIX*, EXPOSURE, FOCUS
PAGE2 LCD BRT, VOL, END SCH, TITLE
PAGE3 DIG EFFT, COUNT RESET
In VCR mode
PAGE1 MENU, VOL, TITLE, MULTI SRCH,
x/
PB*,
m
*,
BX *, M
*
PAGE2 LCD BRT, DIG EFFT, END SCH,
x/
PB*,
m
*,
BX *, M
*
PAGE3 DATA CODE, COUNT RESET,
qREC
CTRL,
x/
PB*,
m
*,
BX *,
M
*
* (DCR-IP7E only)
See page 142 for the MEMORY/NETWORK
mode (DCR-IP7E only).
mode (DCR-IP7E only).
To turn on/off the screen buttons
Press DISPLAY. However, the finder can be used
only in mirror mode.
Press DISPLAY. However, the finder can be used
only in mirror mode.
A screen where the FN button is displayed is
referred to as the FN screen in this operating
instructions.
referred to as the FN screen in this operating
instructions.
Introduction – Basic operations
Для возвpaтa к экpaнy FN
Bыбepитe
OK, зaтeм
RETURN или
END c помощью
v/V/b/B нa кнопкe
yпpaвлeния, зaтeм нaжмитe нa цeнтp
z.
Зaтeм выбepитe EXIT c помощью
v/V/b/B нa
кнопкe yпpaвлeния, зaтeм нaжмитe нa цeнтp
z.
z.
Для выполнeния ycтaновок
Bыбepитe
OK c помощью
v/V/b/B нa
кнопкe yпpaвлeния, зaтeм нaжмитe нa цeнтp
z. Oтобpaжeниe вepнeтcя к экpaнy PAGE1/
PAGE2/PAGE3.
z. Oтобpaжeниe вepнeтcя к экpaнy PAGE1/
PAGE2/PAGE3.
Для отмeны ycтaновок
Bыбepитe
OFF или AUTO c помощью
v/V/
b/B нa кнопкe yпpaвлeния, зaтeм нaжмитe нa
цeнтp
цeнтp
z. Oтобpaжeниe вepнeтcя к экpaнy
PAGE1/PAGE2/PAGE3.
Экpaнныe кнопки нa экpaнe PAGE1/PAGE2/
PAGE3
B peжимe CAMERA
PAGE3
B peжимe CAMERA
PAGE1 MENU, FADER, SELFTIMER, MEM MIX*,
EXPOSURE, FOCUS
PAGE2 LCD BRT, VOL, END SCH, TITLE
PAGE3 DIG EFFT, COUNT RESET
B peжимe VCR
PAGE1 MENU, VOL, TITLE, MULTI SRCH,
x/
PB*,
m
*,
BX *, M
*
PAGE2 LCD BRT, DIG EFFT, END SCH,
x/
PB*,
m
*,
BX *, M
*
PAGE3 DATA CODE, COUNT RESET,
qREC
CTRL,
x/
PB*,
m
*,
BX *,
M
*
* (только модeль DCR-IP7E)
Инфоpмaцию о peжимe MEMORY/NETWORK
cм. нa cтp. 142 (только модeль DCR-IP7E).
cм. нa cтp. 142 (только модeль DCR-IP7E).
Чтобы включить/выключить экpaнныe
кнопки
Haжмитe кнопкy DISPLAY. Oднaко
видоиcкaтeль можно иcпользовaть только в
зepкaльном peжимe.
кнопки
Haжмитe кнопкy DISPLAY. Oднaко
видоиcкaтeль можно иcпользовaть только в
зepкaльном peжимe.
B этой инcтpyкции по экcплyaтaции экpaн,
нa котоpом pacположeнa кнопкa FN,
нaзывaeтcя экpaном FN.
нa котоpом pacположeнa кнопкa FN,
нaзывaeтcя экpaном FN.
Bвeдeниe – Ocновныe опepaции
Quick Start Guide
16
Englsih
Quick Start Guide
Inserting a cassette
(p. 36)
Connecting the mains lead
(p. 30)
Use the battery pack when using your camcorder outdoors (p. 25).
This guide introduces you to the basic operations for
recording/playback. See the page in parentheses “( )” for
more information.
recording/playback. See the page in parentheses “( )” for
more information.
AC power adaptor (supplied)
Connect the plug with its
v
mark facing the lens side.
Open the jack
cover.
cover.
1
Slide OPEN/
ZEJECT
in the direction of the
arrow and open the
lid.
arrow and open the
lid.
2
Push the middle
portion of the back of
the cassette to insert.
Insert it the cassette
in a straight line
deeply into the
cassette compartment
with the window
facing out.
portion of the back of
the cassette to insert.
Insert it the cassette
in a straight line
deeply into the
cassette compartment
with the window
facing out.
3
Close the cassette
compartment by
pushing down the
cassette lid halfway.
After the cassette
compartment goes
down completely,
close the lid until it
clicks.
compartment by
pushing down the
cassette lid halfway.
After the cassette
compartment goes
down completely,
close the lid until it
clicks.
Quick Start Guide
17
Recording a picture
(p. 38)
Monitoring the playback picture on the LCD
screen
(p. 51)
Viewfinder
When the LCD panel
is closed, pull out the
viewfinder until it
clicks and use it to
monitor your
recording.
When the LCD panel
is closed, pull out the
viewfinder until it
clicks and use it to
monitor your
recording.
1
Remove the lens cap.
2
Press OPEN
to open the
LCD panel.
to open the
LCD panel.
NOTE
Do not pick up your
camcorder by holding
the viewfinder, the
LCD panel, the battery
pack, or the jack cover.
Do not pick up your
camcorder by holding
the viewfinder, the
LCD panel, the battery
pack, or the jack cover.
2
Select
, then press the centre
z
on the control button to rewind the
tape.
tape.
3
Select
, then press the centre
z
on the control button to start
playback.
playback.
MEMORY/
NETWORK
VCR
CAMERA
(CHG)
POWER
OFF
ON
MODE
START/STOP
MEMORY/
NETWORK
VCR
CAMERA
(CHG)
POWER
OFF
ON
MODE
3
Set the POWER switch to
CAMERA.
The CAMERA lamp lights up.
CAMERA.
The CAMERA lamp lights up.
4
Press START/STOP. Your
camcorder starts recording. To
stop recording, press START/
STOP again.
camcorder starts recording. To
stop recording, press START/
STOP again.
1
Set the POWER switch to VCR.
The VCR lamp lights up.
The VCR lamp lights up.
When you purchase your camcorder, the clock
is not set up yet. Set up the clock before
recording (p. 32).
is not set up yet. Set up the clock before
recording (p. 32).
Click on the first or last page to see other DCR-IP5 / DCR-IP5E / DCR-IP7BT / DCR-IP7E (serv.man2) service manuals if exist.