Read Sony CPD-220AS Service Manual online
– 5 –
SECTION 1
GENERAL
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remein as in the manual.
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remein as in the manual.
7
GB
Functions of Controls
Functions of Controls
Front
1
2
3
4
5
6
7
8
9
2
!º
!¡
!™
!£
!¢
!∞
Rear
p
CPD-120AS
Continued to the next page ➔
!§
@¡
@™
!¶
@£
!•
@º
!ª
@¢
6
GB
Warning on Power Connection
• Use the supplied power cord.
For the customers in UK.
If you use the display in UK, please use the supplied UK cable with UK plug.
for 100 to 120 V AC
for 220 to 240 V AC
for 240 V AC only
• Before disconnecting the power cord, wait at least 30 seconds after turning
off the power switch to discharge static electricity from the CRT display
surface.
surface.
• After the power has been turned on, the CRT is demagnetized for
approximately 5 seconds. This generates a strong magnetic field around the
bezel which may affect the data stored on magnetic tape or disks near the
bezel. Place such magnetic recording equipment and tapes/disks at a distance
from this unit.
bezel which may affect the data stored on magnetic tape or disks near the
bezel. Place such magnetic recording equipment and tapes/disks at a distance
from this unit.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
accessible.
Precautions
8
GB
Functions of Controls
p
CPD-220AS
!§
@¡
@º
!¶
@™
!•
@£
!ª
@¢
1
2
3
4
5
6
3
4
5
6
7
8
8
9
!º
!¡
!™
!£
!¢
!∞
Microphone
Main speaker
Display
Å
Size button
d
Geometry button
Color
temperature button
?
Reset switch
¤
Mute button and
indicator
≥
Volume/Bass
boost button
S
Centering
button
Brightness/GPE
button
.
Volume –/+
buttons
>
–/+ Contrast
button
u
Power switch
and indicator
Sub woofer
The internal microphone is turned off when an
external microphone is connected.
external microphone is connected.
—
Displays OSD when adjusting.
Adjusts picture size (page 20).
Adjusts pincushion and rotation (pages 21, 22).
Adjusts color temperature (page 23).
Resets adjustments to factory setting (page 24).
Mutes sound (page 17).
Adjusts speaker volume or selects bass boost mode
(page 26).
(page 26).
Adjusts picture centering (page 19).
Adjusts picture brightness or selects GPE mode (page
25).
25).
Adjusts speaker volume (page 16).
The default setting of the volume level is 30 %.
The default setting of the volume level is 30 %.
Adjusts picture contrast (page 17).
Turns on and off the display.
—
9
GB
!§
!¶
!¶
!•
!ª
@º
@¡
@™
@™
@£
@¢
@¢
AC IN connector
2
Audio plug (green)
h
MIC plug (red)
;
Video signal cable
(blue)
USB downstream
connector
h
Microphone jack
2
Headphones jack
Tilt-Swivel
USB upstream
connector
Connect the supplied power cord (page 12).
Connect to the computer’s speaker output
(page 11).
(page 11).
Connect to the computer’s microphone input (page
11).
11).
Connect to the computer’s video output
(page 11).
(page 11).
Connect to a USB device (page 11).
Connect a microphone (not supplied).
Connect headphones (not supplied). The speakers are
turned off when headphones are connected.
turned off when headphones are connected.
Adjusts the angle of the display (page 14).
Connect to the computer’s USB ports when using a
USB (universal serial bus) device connected to the
display (page 11).
USB (universal serial bus) device connected to the
display (page 11).
Functions of Controls
Click on the first or last page to see other CPD-220AS service manuals if exist.