CPD-220AS - Sony Monitor Service Manual (repair manual). Page 2

– 2 –

Failure

Power LED

Mute LED

Scan/S cap Failure

Blink Amber

(On 1.5 sec, Off 0.5 sec)

ABL Failure

Blink Amber

(On 0.5 sec, Off 1.5 sec)

Audio Failure

Blink Amber

Blink Amber

(1 sec/cycle)

(1 sec/cycle)

Aging Mode : Raster aging

During Power Save, press "POWER switch" button for longer than 4 seconds.

Self Test : OSD color-bar indication

During Power Save, press "POWER switch" button for longer than 8 seconds.

Power
consumption
CPD-120AS
130 W (max)
CPD-220AS
150 W (max)
15 W (max)

10 W (max)

Approx. 10 W

1)

Required
resumption time
—

—

Approx. 3 sec.

Approx. 10 sec.

—

u

indicator
Green

Green

Green ˜
     Orange
Orange

Off

Normal
operation

Suspend (1st step
of power saving)
Active-off (2nd
 step of power
 saving)
Power-off

This display meets the power saving guidelines set by the International

E

NERGY 

S

TAR Program. It is capable of reduced power consumption when

used with a computer equipped with Display Power Management Signaling
(DPMS). By sensing the absence of the sync signal coming from the computer,
it will reduce the power consumption as follows:

✔

The Power Saving function will automatically put the display into Active-off state if the
power switch is turned on without any video signal input. Once the horizontal and
vertical syncs are sensed, the display will automatically return to its Normal operation
state.

✔

1) To lower the power consumption to 0 W, disconnect the power cord.

On

On

Off

Off

Off

1

2

3

4