DVP-PQ2 (serv.man2) - Sony DVD Service Manual (repair manual). Page 7

Read Sony DVP-PQ2 (serv.man2) Service Manual online

1-3
Using the
Design Sheet
You can open the clear, round-shaped cover on
the lid of this player and exchange the supplied
“design sheet” with your favorite pictures or
photos.
1
Press 
ZPUSH to open the lid of the player.
2
On the back side of the lid, slide the locks
toward the center (
1) at the same time
as shown in the illustration and release
the hooks (
2). The front part of the ring
will pop up (
).
3
Lower the lid and remove the ring. Then
remove the transparent cover.
4
Place a design sheet on the lid.
Replace the transparent cover, aligning
the one upper and two lower cutouts
with the lid.
5
Engage the upper two tabs of the lid with
the slots in the ring (
1). Insert the two
lower tabs of the ring into the slots in the
lid (
2) until it clicks.
Hint
Align the marks on both the transparent cover
and the ring when replacing them.
Area Code List
Standard
Code number
Argentina
2044
Australia
2047
Austria
2046
Belgium
2057
Brazil
2070
Canada
2079
Chile
2090
China
2092
Denmark
2115
Finland
2165
France
2174
Germany
2109
India
2248
Indonesia
2238
Italy
2254
Japan
2276
Korea
2304
Malaysia
2363
Mexico
2362
Netherlands
2376
New Zealand
2390
Norway
2379
Pakistan
2427
Philippines
2424
Portugal
2436
Russia
2489
Singapore
2501
Spain
2149
Sweden
2499
Switzerland
2086
Thailand
2528
United Kingdom 2184
7
Press ENTER.
8
Select the limitation level (e.g., “4:PG13”)
using 
V/v, and press ENTER.
The viewer limitation becomes more strict as
the number becomes lower.
To return to the previous screen
Press 
O.
To turn off the display
Press DISPLAY.
To change the password
After performing step 4 of “Setting the
playback limitation level,” select “CHANGE
PASSWORD 
c” using V/v, and press ENTER.
Enter your 4-digit password using 
B/V/v/b,
and press ENTER. The display for changing
the password appears. Enter a new password
and press ENTER. To confirm the password,
enter the new password again, and press
ENTER.
Playing discs with playback
limitations
1
Place the disc on the tray, and close the lid
until it clicks. Then press 
H.
The display for entering your password
appears.
2
Enter the 4-digit password using 
B/V/v/b,
and press ENTER.
Playback starts.
To cancel the playback limitation
Select “OFF” for “LEVEL” in step 8 of “Setting
the playback limitation level.”
If you forget your password
Open the lid and perform steps 1-3 of “Setting
the playback limitation level.” Enter the 6-digit
number “199703” in step 4, and press ENTER.
After entering a new password and pressing
ENTER, repeat the entire procedure from step 1
of “Playing discs with playback limitations.”
E n t e r   p a s s w o r d ,   t h e n   p r e s s                   .
ENTER
PARENTAL CONTROL
You can set a password and choose a playback
limitation level for DVDs with the playback
limitation function. Scenes that are limited by
this function may be blocked or replaced with
different scenes.
Setting the playback limitation
level
1
Press DISPLAY repeatedly in stop mode to
show Setup Display.
2
Select “SCREEN SETUP” using 
V/v, and
press ENTER.
3
Select “PARENTAL CONTROL 
c” using V/v,
and press ENTER.
4
 Enter a 4-digit password, and press ENTER.
Select the numbers using 
V/v. Press b to go to
the next digit. When entering a password for
the first time, repeat this step once more to
confirm the entered password.
<TV screen>
5
Select “STANDARD” using 
V/v, and press
ENTER.
6
Select an area as the playback limitation
level standard (e.g., “USA”) using 
V/v,
and press ENTER.
When you chose “OTHERS 
c,” select and
enter a code number from the area code list
given at the end of this section using 
B/V/v/
b.
Limiting
Playback
Enter the number starting from here.
design sheet
Page of 79
Display

Click on the first or last page to see other DVP-PQ2 (serv.man2) service manuals if exist.