Read Sony DVP-PQ2 (serv.man2) Service Manual online
1-4
For better pictures
If your TV* has an S VIDEO input jack, connect this player to your TV
using an S VIDEO cord for higher quality images.
using an S VIDEO cord for higher quality images.
* You can also use monitors and projectors.
Connecting to your TV using an S VIDEO cord
For better sound
You can connect this player to an amplifier and speakers to enjoy better
sound. See the relative diagrams below to connect to an amplifier.
sound. See the relative diagrams below to connect to an amplifier.
– A stereo amplifier: Use a stereo audio cord.
– An AV amplifier with DTS, Dolby Digital, or MPEG audio decoder: Use
– An AV amplifier with DTS, Dolby Digital, or MPEG audio decoder: Use
a coaxial digital cord*. You can enjoy the DVD’s DTS, Dolby Digital, or
MPEG audio sound.
MPEG audio sound.
– An AV amplifier with Dolby Surround (Pro Logic) decoder: Use a stereo
audio cord or coaxial digital cord*. You can enjoy the DVD’s Dolby
Surround sound.
Surround sound.
* If you connect a coaxial digital cord, you cannot use the TVS function of this
player.
Before operating this player, adjust the settings of this player (“DIGITAL
OUT”/“DOLBY DIGITAL”/“DTS”/“MPEG”) according to the connected
components (e.g., amplifier). For details, see “Settings and Adjustments”
on the Blue Side of this manual.
OUT”/“DOLBY DIGITAL”/“DTS”/“MPEG”) according to the connected
components (e.g., amplifier). For details, see “Settings and Adjustments”
on the Blue Side of this manual.
Connecting an amplifier using a stereo audio cord
Connecting an amplifier using a coaxial digital cord
Note
When you use the DIGITAL OUT (COAXIAL) jack to listen to MPEG audio signals
and set “MPEG” to “MPEG” in “AUDIO SETUP,” no sound will come from your
speakers if you select one of the TVS modes.
and set “MPEG” to “MPEG” in “AUDIO SETUP,” no sound will come from your
speakers if you select one of the TVS modes.
The power requirements, power consumption, and
region code of this player are indicated at the bottom
of the player. Check that the player‘s operating
voltage is identical with your local power supply.
region code of this player are indicated at the bottom
of the player. Check that the player‘s operating
voltage is identical with your local power supply.
On safety
• Caution – The use of optical instruments with this
product will increase eye hazard.
• Should any solid object or liquid fall into the
cabinet, unplug the player and have it checked by
qualified personnel before operating it any further.
qualified personnel before operating it any further.
On power sources (mains)
• The player is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the player itself has been turned off.
outlet, even if the player itself has been turned off.
• If you are not going to use the player for a long
time, be sure to disconnect the player from the wall
outlet. To disconnect the AC power cord (mains
lead), grasp the plug itself; never pull the cord.
outlet. To disconnect the AC power cord (mains
lead), grasp the plug itself; never pull the cord.
On placement
• Do not install the player in an inclined position. It
is designed to be operated only in a horizontal
position.
position.
• Place the player in a location with adequate
ventilation to prevent heat build-up in the player.
• Do not place the player on a soft surface such as a
rug that might block the ventilation holes.
• Do not place the player in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
excessive dust, or mechanical shock.
• Keep the player and discs away from equipment
with strong magnets, such as microwave ovens, or
large loudspeakers.
large loudspeakers.
On operation
• If the player is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lenses inside the
player. Should this occur, the player may not
moisture may condense on the lenses inside the
player. Should this occur, the player may not
Precautions
Connecting
Other
Components
Other
Components
To S-VIDEO OUT
S VIDEO cord
(not supplied)
(not supplied)
To S VIDEO input
TV
Player
To AUDIO OUT L/R
White
Red
White
Red
Audio/video cord
(supplied)
(supplied)
To AUDIO OUT L/R
Audio/video cord
(supplied)
(supplied)
To video input
TV
Player
To audio
input
input
Yellow
Red
Yellow
Red
Stereo audio cord
(not supplied)
(not supplied)
White
Amplifier
White
To VIDEO OUT
Audio/video cord
(supplied)
(supplied)
To video input
TV
Player
To coaxial digital
input
input
Yellow
Yellow
Coaxial digital cord
(not supplied)
(not supplied)
Amplifier
To audio
input
input
To VIDEO OUT
To DIGITAL OUT
(COAXIAL)
(COAXIAL)
Region code
Power requirements and
power consumption
power consumption
AUDIO OUT
DIGITAL OUT(COAXIAL)
S-VIDEO OUT
VIDEO OUT
(R)
(L)
I N P U T
V I D E O
I N P U T
L ( w h i t e )
R ( r e d )
A U D I O
S-VIDEO OUT
VIDEO OUT
I N P U T
V I D E O
AUDIO OUT
DIGITAL OUT(COAXIAL)
DIGITAL IN
COAXIAL
COAXIAL
DVP-XXXX
00V 00Hz
00W
NO.
0-000-000-00
X
Connecting headphones/earphones
Connect headphones or earphones to the
i (phone) jack and adjust the
(volume) control.
Headphones/earphones
(not supplied)
(not supplied)
To
i (phone) jack
(volume) control
S-VIDEO OUT
VIDEO OUT
AUDIO OUT
L
R
DIGITAL OUT(COAXIAL)
AUDIO OUT
DIGITAL OUT(COAXIAL)
S-VIDEO OUT
VIDEO OUT
(R)
(L)
I N P U T
S V I D E O
L ( w h i t e )
R ( r e d )
A U D I O
Click on the first or last page to see other DVP-PQ2 (serv.man2) service manuals if exist.