Read Sony DVP-K800D Service Manual online
— 10 —
YY
64
65
66
70
71
72
73
80
81
82
83
84
85
86
87
88
89
90
96
97
A0
A1
A2
A3
A4
A5
A6
A7
B0
B1
B2
B3
B4
B5
B6
B7
B8
C0
C1
D0
D1
E0
E1
CLV servo does not lock in within the specified time.
FG servo does not reach the target speed within the
specified time.
specified time.
Spindle is not rotating at x1 speed. (RF Edge)
System control requests address that does not exist.
System control requests time code that is not used.
System control requests track No. that is not used.
The lock-in operation is not completed within the
specified number of times.
specified number of times.
Continuity of address has abnormality. (DVD)
Cannot read address even retry is executed. (CD)
TOC read is not completed within the specified period
of time.
of time.
Physical Information Read Error ( CTRL DATA ECC
ERR)
ERR)
Physical Information Read Error ( CTRL DATA
INSA ERR)
INSA ERR)
Physical Information Read Error ( CTRL DATA
FULL ERR)
FULL ERR)
Physical Information Read Error ( CTRL DATA RUN
OVER)
OVER)
Physical Information Read Error ( CTRL DATA Time
Out)
Out)
Layer No has abnormality.
CD Text Data Read Error
Servo recovery has failed when starting a disc.
Auto Sequence Time Out
Auto Sequence has exceeded the specified times.
Stop request from drive microprocessor
Did not return to the mode for a specified time.
Feed error. Retry is impossible.
GetInfo error. Stop
An attempt is made to playback a DVD-R Disc
Failed to execute Decrypt
SlowR. Target address of searching is illegal.
Feed error. Stop
Due to feeder.
Due to video hang-up
Error in DMX
Waiting for data from SlowR
Navi Pack sector address is different during SlowR
mode
mode
Video hang-up during SlowR mode
Time out while waiting for ending of SlowR Gttgt
Waiting for data during FF/FR
Waiting for video data during FF/FR
The installed HI microprocessor ROM does not match
the destination.
the destination.
HI microprocessor UART1 communication port has
abnormality.
abnormality.
EMG code is not present upon power-off request from
drive microprocessor
drive microprocessor
Cannot return t stop mode. Power Off
Drive microprocessor - system error (STATUS ERR)
Drive microprocessor - system error (MECHAM
MODE ERR)
MODE ERR)
ZZ
FF
00
01
02
12
03
13
04
14
05
15
UNKONWN
NO DISC
CD 12 cm
CD 8 cm
SINGLE DVD 12 cm
SINGLE DVD 8 cm
DUAL 12 cm
CDR 12 cm
CDR 8 cm
DVDR 12 cm
DVDR 8 cm
Click on the first or last page to see other DVP-K800D service manuals if exist.