Read Sony DVP-K800D Service Manual online
— 5 —
SERVICE NOTE
1.
DISK REMOVAL PROCEDURE (at POWER OFF)
1)
Insert a cross-tip screwdriver into a hole at the bottom, and rotate the cam gear 1 in direction A. (See Fig. 1)
Note:
To prevent a damage of cam gear, rotate it in direction A by 1/4 turn.
2)
Draw out the tray 2 in direction B by hand, and remove a disk. (See Fig. 1)
2.
NOTE ON MOUNTING SLED MOTOR
1)
Push the sled motor assy 1 toward direction A. (See Fig. 2)
2)
Tighten two screws 2 (M1.7
×
2.5).
Fig. 2
3)
Raising the MD block assy 3 90 º with the side down. confirm that the optical pick-up 4 falls by self weight. (See Fig. 3)
4)
Further, with the front side of MD block assy 3 up, confirm that the optical pick-up falls by self weight.
DVP-K800D
Fig. 3
1
Sled motor assy
2
Two screws (M1.7
×
2.5)
3
MD block assy
4
Optical pick-up
Lower
Upper
Front side
Lower
Upper
Front side
A
B
⊕
Screw Driver
1
Cam gear
2
Tray
Fig. 1
Click on the first or last page to see other DVP-K800D service manuals if exist.