Read Sony DVP-K800D Service Manual online
— 8 —
4-2.
Cleaning Spindle Motor Turntable
1)
Remove the tray. (Refer to 2-2)
2)
Clean the spindle motor turntable if disc antiskid rubber (black)
is dirty. (See Fig.7)
is dirty. (See Fig.7)
Fig. 7
4-3.
Aligning Phase of Cam Gear and Drive Gear
1)
Align triangle marks when assembling the cam gear and drive
gear. (See Fig. 8)
gear. (See Fig. 8)
Fig. 8
Spindle motor
Turntable
Turntable
Drive gear
Cam gear
Align triangle marks.
4-4.
Deformation of Insulator
1)
Assemble the spindle base into the base unit.
2)
Lock with 4 shoulder screws. (See Fig. 9)
3)
Check if 4 insulators deformed. (See Fig. 9)
Fig. 9
4-5.
Note on Connecting OPT Harness
1)
The optical pick-up could be destroyed unless the OPT harness
is connected normally to the connector. (See Fig. 10)
is connected normally to the connector. (See Fig. 10)
Fig. 10
NG
Four step screws
Two insulators
Two insulators
Insulator
Good
Good
NG
OPT harness
Connector
Click on the first or last page to see other DVP-K800D service manuals if exist.