Read Sony SAL70200G Service Manual online
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
HELP04
Adhesive bond (B-40):
J-6082-614-A
Adhesive bond (LOCTITE 460)
Note:
Use the adhesive bond (LOCTITE 460) or the equivalent.
Do not use the instant glue which becomes white when dried.
1.
Apply the adhesive bond (LOCTITE 460) to the indicated portion of outer barrel and affix the mount index on it.
Note:
Apply the surrounding of center of counter bore for the adhesive bond not to seep out.
2.
Install the tripod base roller to the tripod mount screw, apply the adhesive bond (B-40) to the tip of screw and install them to the outer
barrel.
3.
Affix the rubber sheet, aligning with indicated line while pushing it without pulling.
4.
Remove the inside of the rubber sheet.
Note:
If the rubber sheet is pulled, it stretches and deforms. Therefore, affix it, pushing it down.
5.
Affix the zoom ring friction cloth to the indicated portion of outer barrel.
Note:
If the zoom ring friction cloth is pulled, it stretches and deforms. Therefore, affix it, pushing it down.
Outer barrel
Mount Index
Tripod Mount Screw
Tripod Mount Screw
Tripod
Mount
Screw
Mount
Screw
Tripod
Mount
Screw
Mount
Screw
Apply the
adhesive bond
(B-40)
adhesive bond
(B-40)
Tripod
Base
Roller
Base
Roller
Tripod
Base
Roller
Base
Roller
Apply the adhesive bond
(LOCTITE460)
(LOCTITE460)
Outer Barrel
Rubber sheet
affixing location
affixing location
Affix the
rubber sheet.
rubber sheet.
Inside of
rubber sheet
rubber sheet
Peel off the inside
of rubber sheet.
of rubber sheet.
Zoom operation ring
friction cloch affixing
location (lower ring)
friction cloch affixing
location (lower ring)
Zoom Ring Friction Cloth
Click on the first or last page to see other SAL70200G service manuals if exist.