Read Sony SAL70200G Service Manual online
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
HELP03
Anti-diffusion agent (A-20):
J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
Adhesive (adhesive ivory white)
Note:
Use the adhesive (adhesive ivory white) or the equivalent.
1.
Apply the anti-diffusion agent (A-20) to the indicated portion (all circumferences) of outer barrel.
2.
Install the outer barrel, aligning the DM PC board unit with the switch base plate block installation window.
3.
Connect the connector of switch base plate block to the DM PC board unit.
4.
Rotate the outer barrel in the arrow direction so that the mount index is aligned with the length hole.
5.
Apply the adhesive bond (B-40) to tips of four screws and fix the switch base plate block with four screws.
6.
Paint the cross-slot on the head of screw. (Four locations)
Note:
The white paint should not leak from the cross-slot.
Outer Barrel
Outer Barrel
Connector of
switch base plate block
switch base plate block
Cut view
Inside
Outside
Cut
view
view
Apply the anti-diffusion
agent (A-20) (All round)
agent (A-20) (All round)
Switch base plate
block installation
window
block installation
window
DM PC Board Unit
DM PC Board Unit
Apply the white paint
Rotate the outer barrel
Length hole
Mount Index
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Click on the first or last page to see other SAL70200G service manuals if exist.