Read Sony SAL70200G Service Manual online
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
HELP07
Adhesive bond (B-10): J-6082-612-A
1.
Bridge-solder the harness leading from the flexible BL PWB harness (yellow) to two leads of IC (See the figure.) on the DC-DC PC
board unit (B side).
2.
Fix the DC-DC PC board unit with three fixing screws. Apply the adhesive bond (B-10) to the heads of screws. (Three locations)
3.
Solder two lead wires (black/red) leading from the flexible BL PWB and three lead wires (blue/black/yellow) leading from the stator.
DC-DC PC Board Unit
(Side B)
DC-DC PC Board Unit
(Side A)
DC-DC PC Board Unit
Apply the adhesive bond (B-10)
Apply the adhesive bond (B-10)
(From Flexible
BL PWB)
BL PWB)
Harness (Red)
Harness (Black)
Harness (Yellow)
(From Stator)
Harness (Blue)
Harness (Black)
Harness (Yellow)
(From the Flexible BL PWB)
(From the Flexible BL PWB)
Harness (Yellow)
(From the Flexible
BL PWB)
(From the Flexible
BL PWB)
Bridge-solder two leads of IC.
Click on the first or last page to see other SAL70200G service manuals if exist.