Read Sony SAL70200G Service Manual online
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
7.
Set the zoom operation ring to the WIDE end.
8.
Apply the adhesive bond (B-40) to the tips of four screws and fix the outer barrel with four screws tentatively to the extent that the
outer barrel moves a little in the rotational direction.
9.
Align “70” on the zoom scale with the center of index of outer barrel and tighten four screw firmly.
10. Push the outer barrel to the 1st lens and tighten the outer barrel with three slotted head paling end screws.
Then, apply the adhesive (adhesive ivory white) to head of screws (Three locations).
Note:
The adhesive (adhesive ivory white) should not seep out.
Set to the wide
end position
end position
Zoom Operation Ring
Fix with four screws tentatively
to the extent that the outer barrel
moves a little in the rotational direction.
to the extent that the outer barrel
moves a little in the rotational direction.
Apply the
adhesive bond
(B-40)
adhesive bond
(B-40)
Apply the
adhesive bond
(B-40)
adhesive bond
(B-40)
Tighten three paling end screws and
apply the adhesive (adhesive ivory white)
to the head.
apply the adhesive (adhesive ivory white)
to the head.
Align the position and
tighten the screws firmly.
tighten the screws firmly.
Index
Click on the first or last page to see other SAL70200G service manuals if exist.