Read Sony SAL50F14 Service Manual online
4-19
SAL50F14 (1.4/50) (50mm F1.4)
2. Pattern Check
Note:
When the NG (Red) indicator of “Position” lights during checking, does not care about it (It is normal performance).
1)
Turn the focus ring slowly from the near end “Focus Pattern : 1” to the infinity end “Focus Pattern : 27” and check that the value of
“Focus Pattern” change from 1 to 27 continuously.
2)
Turn the focus ring slowly from the infinity end “Focus Pattern : 27” to the near end “Focus Pattern : 1” and check that the value of
“Focus Pattern” change from 27 to 1 continuously.
Fig. 4-6-7
3)
Click the
[Exit]
button.
4)
Click the
[End]
button to terminate the lens adjustment program.
5)
Turn the POWER switch of the camera to OFF.
6)
After the pattern check is completed, apply the adhesive bond (B-10) as shown in Fig. 4-6-8.
Fig. 4-6-8
h
h
h
h
h
Hold Sheet
Brush Hole Cover
Apply the adhesive bond (B-10)
Focus Brush
Hold Sheet Tape
Hold Sheet Tape
Ver. 1.4 2010.02
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
Click on the first or last page to see other SAL50F14 service manuals if exist.