Read Sony SAL50F14 Service Manual online
4-15
SAL50F14 (1.4/50) (50mm F1.4)
5)
Loosen the six screws fixing the focusing ring set plate, and set the focusing ring to the infinity stop position without moving the
helicoid. (Refer to Fig.4-4-7.)
6)
Tighten the six screws loosened in step 5).
Fig.4-4-7
7)
Check that the focusing ring moves smoothly from minimum distance to infinity, and perform “4-4-1. Flange Back (f’F) Check”
again.
8)
After the adjustment is completed, apply the adhesive bond (B-10) to the position shown in the Fig.4-4-8.
Fig.4-4-8
Focus Operating Ring
Focusing Ring
Screws
Screws
Screws
Focus Operating Ring
Apply the adhesive bond (B-10) (Six screws)
Click on the first or last page to see other SAL50F14 service manuals if exist.