Read Sony SAL50F14 Service Manual online
4-18
SAL50F14 (1.4/50) (50mm F1.4)
4-6-2. Focus Brush Position Adjustment and Pattern Check
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Adhesive bond (B-10)
• Lens Adjustment Program
Note:
Lens Adjustment Program is downloadable from the ESI homepage.
1. Focus Brush Position Adjustment
1)
Remove the hold sheet, hold sheet tape and brush hole cover, and loosen the two screws fixing the focus brush.
Fig. 4-6-5
2)
Set the focus position to infinity end.
3)
Perform the “4-6-1. Focus Brush Position Check”, and adjust the focus brush position until the OK (Green) indicator of “Position”
lights.
Fig. 4-6-6
4)
Tighten the two screws loosened in step 1).
Hold Sheet
Hold Sheet Tape
Brush Hole Cover
Focus Brush
Two screws
Ver. 1.4 2010.02
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
Click on the first or last page to see other SAL50F14 service manuals if exist.