Read Sony SAL24105 Service Manual online
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP44
Adhesive bond (B-10): J-6082-612-A
1.
Affix the flexible substrate set tape and insulating tape to the locations shown in the figure of main frame flexible PC board block.
2.
Fold the main frame flexible board block as instructed.
3.
Affix the flexible substrate set tape A, flexible substrate set tape B, flexible substrate set tape C and flexible substrate set tape D to the
locations shown in the figure of bearing press fitting block.
4.
Affix the main flexible PC board block to the bearing press fitting block, threading the DV encoder block of main flexible PC board
block in the hole of bearing press fitting block. When affixing, use “a” and “b” as references.
Affix the DV encoder block in parallel with the edge surface of bearing press fitting block.
Fold upward
Fold upward
Main Flexible PC Board Block
Fold downward
Fold downward
Fold downward
Fold downward
Fold downward
Flexible Substrate
Set Tape F
(5x10.5mm)
Set Tape F
(5x10.5mm)
Insulating Tape
(11x15mm)
(11x15mm)
Flexible Substrate
Set Tape E
(7.5x14mm)
Set Tape E
(7.5x14mm)
Flexible Substrate
Set Tape G
(6.5x7.5mm)
Set Tape G
(6.5x7.5mm)
Flexible Substrate Set Tape A
Flexible Substrate Set Tape C
Flexible Substrate Set Tape D
Flexible Substrate Set Tape B
Bearing Press Fitting Block
(6.2x10mm)
Hole
Zoom Encoder
DV Encoder
a
b
Main Flexible PC Board Block
Bearing Press Fitting Block
Click on the first or last page to see other SAL24105 service manuals if exist.