Read Sony SAL24105 Service Manual online
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP41
Grease (G-85):
J-6082-626-A
Adhesive bond (B-10): J-6082-612-A
1.
Apply the grease (G-85) to the portion indicated in the figure.
2.
Apply the adhesive bond (B-10) to the indicated portions shown in the figure of tips of two screws and gear (A, B) block.
HELP42
1.
Attach the hook of anti slit spring to the cut portion “a” of bearing press fitting block.
Note:
When operation load is heavy, remove the anti slit spring.
2.
Attach the projection of focus connect ring in the cut portion of bearing press fitting block at three locations as shown in the figure so
that the gear of focus connect ring comes to the bearing of gear of bearing press fitting block. Then, rotate it in the arrow direction.
Apply the grease (G-85)
Apply the adhesive bond (B-10)
Gear (A, B) Block
Cut Portion
Projection
Focus Connect Ring
Bearing Press Fitting Block
Bearing Press Fitting Block
Gear
Bearing of Gear
Hook
Anti Slit Spring
a
Ver 1.3 2007.07
Click on the first or last page to see other SAL24105 service manuals if exist.