Read Sony SAL18135 Service Manual online
SAL18135 (3.5-5.6/18-135 SAM) (DT18-135mm F3.5-5.6 SAM)
1-2
1-5. NOTE ON REPLACEMENT OF SERVICE EXCLUSIVE OPTICS BLOCK
To replace the Service Exclusive Optics Block, connect the lens to the finished Inspection JIG
Ⅱ
, and release the specified plug in the fol-
lowing procedure.
1. Start
up ACSAM-S-Ver.X.XX.exe .
2. Click
[Setup].
Fig.1-5-1
3. Set the following contents in the Setup window.
• Model
SAL18135
• Process
Service
• State
FW Unlock
4. Click
[OK].
Fig.1-5-2
5. When the window below appears. Click [Firm lock:Reset].
Fig.1-5-3
6. When the specified plug is released normally, OK is displayed.
Fig.1-5-4
Note:
The lens cannot be detected when the lens is connected to the camera without releasing the specified plug.
Click on the first or last page to see other SAL18135 service manuals if exist.