Read Sony SAL16F28 Service Manual online
HELP
SAL16F28 (2.8/16 FISH-EYE) (16mm F2.8 Fisheye)
HELP10
Grease (G-30):
J-6082-620-A
Anti-diffusion agent (A-20):
J06082-611-A
Universal wrench:
J-6082-609-A
Chip-A for Universal Wrench: J-6082-609-1
Chip-B for Universal Wrench: J-6082-609-2
1.
Apply the anti-diffusion agent (A-20) to the portions indicated in figure.
2.
Apply the grease (G-30) to the portions indicated in figure.
3.
Align the filter rotation linkage pin and the positioning pin that is attached to connection barrel, attach the filter change cam ring.
4.
Holding the filter change cam ring, release the filter link lever of instruction hole of vicinity in the arrow direction, set the filter
change cam tube.
5.
Align that the positioning pin of front lens barrel, “U groove” of vicinity of “NORMAL” on filter select ring and positioning pin of
connection barrel, then attach them.
6.
Use the universal wrench, tighten the front lens barrel holder.
5
0.5
22 1
6 1
1
3
1
1
∞
22
16
11
8
8
4
4
Front Lens Barrel Holder
Front Lens Barrel
Filter Select Ring
Filter Change Cam Ring
Connection Barrel
Positioning Pin
Filter Rotation Linkage Pin
U groove
Positioning Pin
Apply the anti-diffusion agent(A-20)
(All circumference)
(All circumference)
Apply the grease(G-30)
(All circumference)
(All circumference)
Apply the grease(G-30)
(All circumference)
(All circumference)
Apply the grease(G-30)(Rear side)
Filter Change
Cam Ring
Cam Ring
Filter Change Cam Ring
Hole
Filter Link Lever
Positioning Pin
Connection Barrel
Filter Rotation Linkage Pin
Click on the first or last page to see other SAL16F28 service manuals if exist.